Hello! A problem described in trac's bug #58 still persists after upgrade to 0.4.2. The symptoms are exactly the same: sound is missing on some channels (maybe for 15% of all 50+ channels available), the `ivtvctl -Y` shows, that Mute=1 and typing `ivtvctl -y mute=0` works, but changes nothing. After random 1-30 minutes sound is usually automatically unmuted (but not always).
I live in PAL zone, tuner type is 38, the firmware is the newest one recommended by wiki. Card & driver info (some tuner messages come from second BTTV card): ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.2 (tagged release) loading ivtv: Linux version: 2.6.8-2-k7 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 5 (level, low) -> IRQ 5 tveeprom: Ignoring new-style parameters in presence of obsolete ones tveeprom: ivtv version tveeprom: Hauppauge: model = 26039, rev = C1A5, serial# = 8034660 tveeprom: tuner = TCL MPE05-2 (idx = 105, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = CX25842 (type = 24) tveeprom: decoder processor = CX25842 (type = 1d) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner: Ignoring new-style parameters in presence of obsolete ones tuner (ivtv): chip found at addr 0xc0 i2c-bus bt878 #0 [sw] All bytes are equal. It is not a TEA5767 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840 1-0044: ivtv driver cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: ivtv driver wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887: Ignoring new-style parameters in presence of obsolete ones tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
