Follow up:
I have changed the firmware to 0x2050032 eliminating the warning
messages but this had no other effect.
Reading the mailing list I found that this information might also be
helpful:
#ivtv-tune -c6 -d/dev/video0 << Known good station
#ivtvctl --log-status
ioctl VIDIOC_LOG_STATUS ok
ivtv0: ================= START STATUS CARD #0 ====================
cx25840 1-0044: Video signal: present
cx25840 1-0044: Detected format: NTSC-M
cx25840 1-0044: Detected audio mode: stereo with SAP
cx25840 1-0044: Detected audio standard: BTSC
cx25840 1-0044: Audio muted: no
cx25840 1-0044: Audio microcontroller: running
cx25840 1-0044: Configured audio standard: automatic detection
cx25840 1-0044: Configured audio system: BTSC
cx25840 1-0044: Specified standard: NTSC-M
cx25840 1-0044: Specified input: Tuner
cx25840 1-0044: Specified audio input: Tuner
cx25840 1-0044: Specified audiolock freq: 48 kHz
cx25840 1-0044: Preferred audio mode: stereo
wm8775 1-001b: Input: default
tda9887 1-0043: Data bytes: b=d4 c=30 e=44
ivtv0: ================== END STATUS CARD #0 =====================
As far as I can tell all the diagnostics that I have run say it should
be working with the exception of it only producing zero length files.
Any other tests or suggestions would be very helpful.
-Grant
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
