I have installes 2 TV cards. A WINTV EXPRESS and a PVR 359. WINTV EXPRESS is working well. With the pvr are a lot of problems - I can´t see anything. I installes ivtv-0.4.0 and the firmware. Two copies out of var/log/messages: Jan 18 15:06:56 linux kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2980113 Jan 18 15:06:56 linux [powersave]: ERROR (CPUFreq_Kernel:21) Can not set ondemand governor, maybe your cpufreq driver is too slow. Jan 18 15:06:57 linux kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) Jan 18 15:06:57 linux [powersave]: ERROR (CPUFreq_Kernel:23) Try CPUFREQ_CONTROL=userspace in /etc/sysconfig/powersave/cpufreq. Jan 18 15:06:57 linux kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Jan 18 15:06:57 linux [powersave]: ERROR (PM_Interface:231) Cannot create cpufreq objects Jan 18 15:06:57 linux kernel: tveeprom: audio_processor = CS5331 (type = 9) Jan 18 15:06:57 linux kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom[50], addr=50] Jan 18 15:06:57 linux kernel: bttv: driver version 0.9.16 loaded Jan 18 15:06:57 linux kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Jan 18 15:06:57 linux kernel: tveeprom: module not supported by Novell, setting U taint flag. Jan 18 15:06:57 linux kernel: kobject_register failed for tveeprom (-17) Jan 18 15:06:57 linux kernel: [<c01ee6c3>] kobject_register+0x43/0x50 Jan 18 15:06:57 linux kernel: [<c0255a9d>] bus_add_driver+0x4d/0xa0 Jan 18 15:06:57 linux kernel: [<e988051a>] i2c_add_driver+0x3a/0xc0 [i2c_core] Jan 18 15:06:57 linux kernel: [<c0134291>] sys_init_module+0xa1/0x180 Jan 18 15:06:57 linux smpppd[4937]: smpppd version 1.59 started I don´t know if there is the the reason for the problems.
Jan 18 15:07:00 linux kernel: ivtv0: loading /lib/modules/ivtv-fw-enc.bin Jan 18 15:07:00 linux kernel: ivtv0: loading /lib/modules/ivtv-fw-dec.bin Jan 18 15:07:00 linux kernel: ivtv0: Encoder revision: 0x02050032 Jan 18 15:07:00 linux kernel: ivtv0: Decoder revision: 0x02020023 Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Jan 18 15:07:00 linux kernel: ivtv0: Create encoder radio stream Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) Jan 18 15:07:00 linux kernel: ivtv0: Create decoder VOUT stream Jan 18 15:07:00 linux kernel: ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) Jan 18 15:07:00 linux kernel: ivtv0: loading /lib/modules/ivtv_init_mpeg.bin Jan 18 15:07:00 linux kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 Jan 18 15:07:00 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2002 Jan 18 15:07:00 linux kernel: usbcore: registered new driver usblp Jan 18 15:07:00 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Jan 18 15:07:00 linux kernel: ivtv0: Initialized WinTV PVR 350, card #0 Jan 18 15:07:00 linux kernel: ivtv: ==================== END INIT IVTV ==================== All seems well. Can anybody help me. Thanks Ulf Brislinger -- Brislinger Ulf; H-8315 Gyenesdais; Gödörhazi u. 28 Tel./Fax: +36 83 317 065 e-mail: [EMAIL PROTECTED] _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
