Hello, I recently purchased an Hauppauge PVR-500. I installed it on a SuSE 10.0 machine, followed the howto's on the wiki (very well written, btw), and it was working, I used the 0.4.2 driver. Had some issues with mythtv and sound (but that's for another mailing list), and the second tuner (/dev/video1) was blurry.
I thought I would try a precompiled rpm for the driver (0.3.7.c) to see if that did anything for the second tuner. This is where the problems start. After installing the RPM all I get is this error: FATAL: Error inserting ivtv (/lib/modules/2.6.13-15-default/kernel/drivers/media/video/ivtv.ko): Unknown symbol in module, or unknown parameter (see dmesg) So I thought, "Hey I'll just remove the RPM and redo the howto." I was wrong I get that same exact error. Retried with 0.4.1 and I get the same thing. Someone please help, I'm practically going bald from pulling out my hair on this one. -Shem Here is the relevant (but unhelpful) dmesg: ivtv: module not supported by Novell, setting U taint flag. ivtv: Unknown symbol video_unregister_device ivtv: Unknown symbol video_device_alloc ivtv: Unknown symbol video_register_device ivtv: Unknown symbol video_usercopy ivtv: Unknown symbol video_device_release _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
