Greetings guys.
After a month of trying to get the ivtv-fb driver to work with my xorg.conf
file I really need some help.
I am receiving an error when I do a start x that says that my device is not
found, and that the ivtv-fb module has incorrect parameters.
When I start it with the ivtvdev xorg.conf the X server starts on the monitor,
but not on the TV.
Below are two snippets of the one working and the one that isn't, plus my
dmesg output.
----------------------xorg snippet with errors---------------------------
Section "Device"
Identifier "Hauppauge PVR350"
#Driver "ivtvdev"
Driver "ivtv-fb"
#Option "fbdev" "/dev/fb1" # <-- modify if using another device
#Option "ivtv_fb_card_id" "/dev/fb1" # <-- modify if using another
device
BusID "PCI:00:11.0" # get the ID with lspci convert the value from hexa to
decimal
EndSection
------------------end xorg snippet with errors-----------------------------
Below is part of another xorg config file that starts the x server on the
monitor, but not on the tv. and it is using the old ivtvdev module that
doesn't exist anymore.
------------xorg no errors / no fb--------------------------------------------
Section "Device"
Identifier "Hauppauge PVR350"
Driver "ivtvdev"
Option "fbdev" "/dev/fb1" # <-- modify if using another device
BusID "PCI:00:0b.0" # get the ID with lspci convert the value from
hexa to decimal
EndSection
-----------xorg no errors / no fb------------------------------------
ivtv: module not supported by Novell, setting U taint flag.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (c) loading
ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: ivtv i2c driver #0 passed test.
tveeprom: The eeprom says no radio is present, but the tuner type
tveeprom: indicates otherwise. I will assume that radio is present.
tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[50],ok]
kobject_register failed for tveeprom (-17)
[<c01ee6c3>] kobject_register+0x43/0x50
[<c0255a9d>] bus_add_driver+0x4d/0xa0
[<df30e51a>] i2c_add_driver+0x3a/0xc0 [i2c_core]
[<c0134291>] sys_init_module+0xa1/0x180
[<c0102d1b>] sysenter_past_esp+0x54/0x79
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598,
Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: module not supported by Novell, setting U taint flag.
saa7115: starting probe for adapter SiS96x SMBus adapter at 0x0c00 (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
saa7127: module not supported by Novell, setting U taint flag.
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005)
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler
ivtv: i2c attach [client=MSP3448W-A2,ok]
msp34xxg: daemon started
ivtv: requesting ivtv-fw-enc.bin from hotplug
ivtv: firmware loaded
ivtv: requesting ivtv-fw-dec.bin from hotplug
ivtv: firmware loaded
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 16
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VBI minor 228
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 232
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 48
ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
ivtv: Setting Tuner 47
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: ivtv_enc_thread: pid = 4486, itv = 0xdf5626a0
ivtv: ivtv_enc_vbi_thread: pid = 4487, itv = 0xdf5626a0
ivtv: ivtv_dec_thread: pid = 4488, itv = 0xdf5626a0
ivtv: ivtv_dec_vbi_thread: pid = 4489, itv = 0xdf5626a0
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv_fb: module not supported by Novell, setting U taint flag.
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has
1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xc9510000, mapped to 0xe0410000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
ivtv-osd: fb1: iTVC15 TV out frame buffer device
ivtv: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)
--
Thanks Again,
Joel Webb
President and CEO
PropBot.com L.L.C.
Home of:
PropBot.com
TheCreativeInvestor.com
AllYouCanRent.com
SellAnyHouseQuick.com
703-778-5755 x101
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
