Having a long time ivtv...
now i have a big problem:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.15.4 preempt PENTIUM4 gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 20
ivtv0: Failed to load module tveeprom
ivtv0 warning: i2c client addr: 0x50 not found for command 0x0!
ivtv0: Error -19 reading Hauppauge eeprom.
ivtv0: Possible causes: the tveeprom module was not loaded, or
ivtv0: the eeprom kernel module was loaded before the tveeprom module.
ivtv0: Failed to load module tuner
ivtv0: Failed to load module saa7115
ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
ivtv0: Failed to load module saa7127
ivtv0: Failed to load module msp3400
ivtv0: Failed to load module tda9887
ivtv0: Could not detect tuner standard, defaulting to NTSC.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0xc0045627!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x00 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x44 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045613!
ivtv0 warning: i2c client addr: 0x00 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x21 not found for command 0x40045612!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
Please help!!
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
