Thx Joey for your input. But having ivtv installed via yum from atrpms
didn´t resolve the problem.
It also seems other users are having problems with the new version ivtv
in combination with Mythtv 0.19 and the new Fedora Core 4 new kernel
version.
See e.g. "PVR-350 - FC4 - Fails to load msp3400" from spitfirer24
Any other suggestions?
On Fri, 2006-02-24 at 12:41 -0600, [EMAIL PROTECTED] wrote:
> Is there any reason you aren't using 'yum' to install the IVTV suite?
> It worked quite well for me, and required almost no changes to the
> default install.
>
> Joey
>
> ----- Original Message -----
> From: [EMAIL PROTECTED]
> Date: Thursday, February 23, 2006 1:13 pm
> Subject: [ivtv-users] HowTo install ivtv with Fedora kernel
> 2.6.15-1.1831_FC4
>
> > I tried to install ivtv-0.4.3 and ivtv-0.4.1 on 2.6.15-1.1831_FC4, but
> > didn´t succeed. I used the following install and compile instructions
> > http://ivtvdriver.org/index.php/Howto:Fedora.
> >
> > On version 2.6.14-1.1656_FC4 everything was running fine, but after an
> > update to the new kernel version it stopped working.
> >
> > Working output:
> > Feb 22 20:05:50 localhost kernel: ivtv: ==================== START
> > INITIVTV ====================
> > Feb 22 20:05:50 localhost kernel: ivtv: version 0.4.1 (tagged
> > release)loading
> > Feb 22 20:05:50 localhost kernel: ivtv: Linux version: 2.6.14-
> > 1.1656_FC4gcc-4.0
> > Feb 22 20:05:50 localhost kernel: ivtv: In case of problems please
> > include the debug info between
> > Feb 22 20:05:50 localhost kernel: ivtv: the START INIT IVTV and
> > END INIT
> > IVTV lines, along with
> > Feb 22 20:05:50 localhost kernel: ivtv: any module options, when
> > mailingthe ivtv-users mailinglist.
> > Feb 22 20:05:50 localhost kernel: ivtv0: Autodetected WinTV PVR 350
> > card(cx23415 based)
> > Feb 22 20:05:50 localhost kernel: ACPI: PCI Interrupt
> > 0000:05:06.0[A] ->
> > Link [APC1] -> GSI 16 (level, low) -> IRQ 58
> > Feb 22 20:05:50 localhost kernel: ivtv0: Unreasonably low latency
> > timer,setting to 64 (was 32)
> > Feb 22 20:05:50 localhost kernel: tveeprom: The eeprom says no
> > radio is
> > present, but the tuner type 57
> > Feb 22 20:05:50 localhost kernel: tveeprom: indicates otherwise. I
> > willassume that radio is present.
> > Feb 22 20:05:50 localhost kernel: tveeprom: ivtv version
> > Feb 22 20:05:51 localhost kernel: tveeprom: Hauppauge: model =
> > 48139, rev
> > = K257, serial# = 2980283
> > Feb 22 20:05:51 localhost kernel: tveeprom: tuner = Philips FM1216
> > ME MK3
> > (idx = 57, type = 38)
> > Feb 22 20:05:51 localhost kernel: tveeprom: tuner fmt = PAL(B/G)
> > PAL(I)SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
> > Feb 22 20:05:51 localhost kernel: tveeprom: audio processor = MSP4418
> > (type = 19)
> > Feb 22 20:05:51 localhost kernel: tveeprom: decoder processor =
> > SAA7115(type = 13)
> > Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=tveeprom, addr=50]
> > Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=(tuner unset), addr=61]
> > Feb 22 20:05:51 localhost kernel: saa7115 2-0021: ivtv driver
> > Feb 22 20:05:51 localhost kernel: saa7115 2-0021: saa7115 found @ 0x42
> > (ivtv i2c driver #0)
> > Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=saa7115, addr=21]
> > Feb 22 20:05:51 localhost kernel: saa7127 2-0044: ivtv driver
> > Feb 22 20:05:51 localhost kernel: saa7127 2-0044: saa7129 found @ 0x88
> > (ivtv i2c driver #0)
> > Feb 22 20:05:51 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=saa7127, addr=44]
> > Feb 22 20:05:51 localhost kernel: msp3400 2-0040: ivtv driver
> > Feb 22 20:05:52 localhost kernel: msp3400 2-0040: chip=MSP4418G-B3
> > +nicam+simple +simpler +radio mode=simpler
> > Feb 22 20:05:52 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=MSP4418G-B3, addr=40]
> > Feb 22 20:05:52 localhost kernel: msp3400 2-0040: msp34xxg daemon
> > startedFeb 22 20:05:52 localhost kernel: tda9887 2-0043: (ivtv)
> > chip found @ 0x86
> > (ivtv i2c driver #0)
> > Feb 22 20:05:52 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=tda9887, addr=43]
> > Feb 22 20:05:52 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw
> > firmware (262144 bytes)
> > Feb 22 20:05:52 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw
> > firmware (262144 bytes)
> > Feb 22 20:05:52 localhost kernel: ivtv0: Encoder revision: 0x02050032
> > Feb 22 20:05:52 localhost kernel: ivtv0: Decoder revision: 0x02020023
> > Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder MPEG
> > stream:128 x 32768 buffers (4096KB total)
> > Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder YUV
> > stream:161 x 12960 buffers (2048KB total)
> > Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder VBI
> > stream:80 x 26208 buffers (2048KB total)
> > Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA encoder PCM
> > audiostream: 455 x 4608 buffers (2048KB total)
> > Feb 22 20:05:52 localhost kernel: ivtv0: Create encoder radio stream
> > Feb 22 20:05:52 localhost kernel: ivtv0: Allocate DMA decoder MPEG
> > stream:16 x 65536 buffers (1024KB total)
> > Feb 22 20:05:53 localhost kernel: ivtv0: Allocate DMA decoder VBI
> > stream:512 x 2048 buffers (1024KB total)
> > Feb 22 20:05:53 localhost kernel: ivtv0: Create decoder VOUT stream
> > Feb 22 20:05:53 localhost kernel: ivtv0: Allocate DMA decoder YUV
> > stream:20 x 51840 buffers (1024KB total)
> > Feb 22 20:05:53 localhost kernel: ivtv0: loaded v4l-cx2341x-init-
> > mpeg.binfirmware (155648 bytes)
> > Feb 22 20:05:53 localhost kernel: ivtv0: Initialized WinTV PVR 350,
> > card #0
> > Feb 22 20:05:53 localhost kernel: ivtv: ==================== END
> > INITIVTV ====================
> >
> > NOT working output
> > Feb 22 19:39:28 localhost kernel: ivtv: ==================== START
> > INITIVTV ====================
> > Feb 22 19:39:28 localhost kernel: ivtv: version 0.4.3 (tagged
> > release)loading
> > Feb 22 19:39:28 localhost kernel: ivtv: Linux version: 2.6.15-
> > 1.1831_FC4SMP gcc-4.0
> > Feb 22 19:39:28 localhost kernel: ivtv: In case of problems please
> > include the debug info between
> > Feb 22 19:39:28 localhost kernel: ivtv: the START INIT IVTV and
> > END INIT
> > IVTV lines, along with
> > Feb 22 19:39:28 localhost kernel: ivtv: any module options, when
> > mailingthe ivtv-users mailinglist.
> > Feb 22 19:39:28 localhost kernel: ivtv0: Autodetected WinTV PVR 350
> > card(cx23415 based)
> > Feb 22 19:39:28 localhost kernel: GSI 22 sharing vector 0x4A and
> > IRQ 22
> > Feb 22 19:39:28 localhost kernel: ACPI: PCI Interrupt
> > 0000:05:06.0[A] ->
> > Link [APC1] -> GSI 16 (level, low) -> IRQ 74
> > Feb 22 19:39:28 localhost kernel: ivtv0: Unreasonably low latency
> > timer,setting to 64 (was 32)
> > Feb 22 19:39:28 localhost kernel: tveeprom: The eeprom says no
> > radio is
> > present, but the tuner type 57
> > Feb 22 19:39:28 localhost kernel: tveeprom: indicates otherwise. I
> > willassume that radio is present.
> > Feb 22 19:39:28 localhost kernel: tveeprom: ivtv version
> > Feb 22 19:39:28 localhost kernel: tveeprom: Hauppauge: model =
> > 48139, rev
> > = K257, serial# = 2980283
> > Feb 22 19:39:28 localhost kernel: tveeprom: tuner = Philips FM1216
> > ME MK3
> > (idx = 57, type = 38)
> > Feb 22 19:39:28 localhost kernel: tveeprom: tuner fmt = PAL(B/G)
> > PAL(I)SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 =
> >
> > 0x00400e17)
> > Feb 22 19:39:28 localhost kernel: tveeprom: audio processor = MSP4418
> > (type = 19)
> > Feb 22 19:39:28 localhost kernel: tveeprom: decoder processor =
> > SAA7115(type = 13)
> > Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=tveeprom, addr=50]
> > Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=(tuner unset), addr=61]
> > Feb 22 19:39:28 localhost kernel: saa7115 2-0021: saa7115 found @ 0x42
> > (ivtv i2c driver #0)
> > Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=saa7115, addr=21]
> > Feb 22 19:39:28 localhost kernel: saa7127 2-0044: saa7129 found @ 0x88
> > (ivtv i2c driver #0)
> > Feb 22 19:39:28 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=saa7127, addr=44]
> > Feb 22 19:39:29 localhost kernel: tda9887 2-0043: (ivtv) chip found
> > @ 0x86
> > (ivtv i2c driver #0)
> > Feb 22 19:39:29 localhost kernel: ivtv0: i2c attach to card #0 ok
> > [client=tda9887, addr=43]
> > Feb 22 19:39:29 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw
> > firmware (262144 bytes)
> > Feb 22 19:39:29 localhost kernel: ivtv0: loaded v4l-cx2341x-dec.fw
> > firmware (262144 bytes)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Encoder revision: 0x02050032
> > Feb 22 19:39:29 localhost kernel: ivtv0: Decoder revision: 0x02020023
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder MPEG
> > stream:128 x 32768 buffers (4096KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder YUV
> > stream:161 x 12960 buffers (2048KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder VBI
> > stream:80 x 26208 buffers (2048KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA encoder PCM
> > audiostream: 455 x 4608 buffers (2048KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Create encoder radio stream
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA decoder MPEG
> > stream:16 x 65536 buffers (1024KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA decoder VBI
> > stream:512 x 2048 buffers (1024KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: Create decoder VOUT stream
> > Feb 22 19:39:29 localhost kernel: ivtv0: Allocate DMA decoder YUV
> > stream:20 x 51840 buffers (1024KB total)
> > Feb 22 19:39:29 localhost kernel: ivtv0: loaded v4l-cx2341x-init.mpg
> > firmware (155648 bytes)
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x40086d11!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x80287610!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x40287611!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x40085618!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x80287610!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x40287611!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x402c5639!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x80287610!
> > Feb 22 19:39:29 localhost kernel: ivtv0 warning: i2c client addr:
> > 0x40 not
> > found for command 0x40287611!
> > Feb 22 19:39:29 localhost kernel: ivtv0: Initialized WinTV PVR 350,
> > card #0
> > Feb 22 19:39:29 localhost kernel: ivtv: ==================== END
> > INITIVTV ====================
> >
> > Any clue how to fix?
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
