Hey I seem to be having some trouble with my PVR-250 it was previously working ... I've been working on my machine a bit and now it doesn't seem to recognise it any more. I can still capture from the S-video port but not from the tuner.
heres the dmesg I get ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.12-1.1378_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based) PCI: Found IRQ 5 for device 0000:00:0a.0 tveeprom: ivtv version tveeprom: Hauppauge: model = 32032, rev = B326, serial# = 7107243 tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = MSP4448 (type = 1b) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Oct 9 2005 16:09:27 ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02040024 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: tuner type not set tuner 1-0061: tuner type not set ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== and here are the pertinant line in my /etc/modprobe.conf alias char-major-81 videodev alias char-major-81-0 ivtv alias tveeprom tveeprom-ivtv alias msp3400 msp3400-ivtv I tried adding options ivtv tuner=8 before all of those line but it doesn't seem to change anything I'm runninf fedora core 3 Kernel 2.6.12-1.1378_FC3 and I used jarods guide to build my muthtv box. I recently upgraded from mythtv .18 to .19 and it was around then I noticed the problem but it seems to be more complicated then just mythtv not seeing it as I can't capture directly from the /dev/video0 either. and the lines ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] and tuner 1-0061: tuner type not set tuner 1-0061: tuner type not set make me think something else is wrong. thnx for the help. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
