On Mar 3, 2006, at 10:52 PM, Brad wrote: > I recently upgraded my MythTV box from Fedora 3 to 4. Since the > upgrade, I haven't been able to get the capture working. I have tried > unloading and reloading all of the IVTV drivers, and played around > with > the modprobe.conf file to try to resolve this, but with no luck. > Anyone > have any ideas? I am currently running the 2.6.12 kernel. > > Thanks > > --------------------- > > > Mar 3 16:45:57 bradvo kernel: Linux video capture interface: v1.00 > Mar 3 16:45:57 bradvo kernel: ivtv: ==================== START INIT > IVTV ==================== > Mar 3 16:45:57 bradvo kernel: ivtv: version 0.4.3 (tagged release) > loading > Mar 3 16:45:57 bradvo kernel: ivtv: Linux version: 2.6.12-1.1381_FC3 > 686 REGPARM 4KSTACKS gcc-3.4 > Mar 3 16:45:57 bradvo kernel: ivtv: In case of problems please > include > the debug info between > Mar 3 16:45:57 bradvo kernel: ivtv: the START INIT IVTV and END INIT > IVTV lines, along with > Mar 3 16:45:57 bradvo kernel: ivtv: any module options, when mailing > the ivtv-users mailinglist. > Mar 3 16:45:57 bradvo kernel: ivtv0: Autodetected WinTV PVR 350 card > (cx23415 based) > Mar 3 16:45:57 bradvo kernel: ACPI: PCI Interrupt Link [LNKB] enabled > at IRQ 5 > Mar 3 16:45:57 bradvo kernel: PCI: setting IRQ 5 as level-triggered > Mar 3 16:45:57 bradvo kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> > Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 > Mar 3 16:45:57 bradvo kernel: ivtv0: i2c attach to card #0 ok > [client=tveeprom, addr=50] > Mar 3 16:45:57 bradvo kernel: tveeprom: Hauppauge: model = 48132, > rev = > K168, serial# = 2942802 > Mar 3 16:45:57 bradvo kernel: tveeprom: tuner = LG TAPE H001F MK3 > (idx > = 68, type = 47) > Mar 3 16:45:57 bradvo kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = > 0x08, v4l2 = 0x00001000) > Mar 3 16:45:57 bradvo kernel: tveeprom: audio_processor = MSP3440 > (type > = 11) > Mar 3 16:45:57 bradvo kernel: tuner: Unknown parameter `type'
You should have no options in modprobe.conf at all. This is the kernel version of the tuner module failing to load correctly because it does not understand the "type" option. Keith C > Mar 3 16:45:57 bradvo kernel: : chip found @ 0xc2 (ivtv i2c > driver #0) > Mar 3 16:45:57 bradvo kernel: ivtv0: i2c attach to card #0 ok > [client=(tuner unset), addr=61] > Mar 3 16:45:57 bradvo kernel: saa7115 0-0021: ivtv driver > Mar 3 16:45:57 bradvo kernel: saa7115 0-0021: saa7115 found @ 0x42 > (ivtv i2c driver #0) > Mar 3 16:45:57 bradvo kernel: ivtv0: i2c attach to card #0 ok > [client=saa7115, addr=21] > Mar 3 16:45:57 bradvo kernel: saa7127 0-0044: ivtv driver > Mar 3 16:45:57 bradvo kernel: saa7127 0-0044: saa7127 found @ 0x88 > (ivtv i2c driver #0) > Mar 3 16:45:57 bradvo kernel: ivtv0: i2c attach to card #0 ok > [client=saa7127, addr=44] > Mar 3 16:45:57 bradvo kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 > (Mar 22, 2004) > Mar 3 16:45:57 bradvo kernel: msp34xx: init: chip=MSP3448W-A2 +nicam > +simple +simpler +radio mode=simpler > Mar 3 16:45:57 bradvo kernel: ivtv0: i2c attach to card #0 ok > [client=MSP3448W-A2, addr=40] > Mar 3 16:45:57 bradvo kernel: msp34xxg: daemon started > Mar 3 16:45:57 bradvo kernel: tda9885/6/7: chip found @ 0x86 > Mar 3 16:45:57 bradvo kernel: ivtv0: i2c attach to card #0 ok > [client=tda9887, addr=43] > Mar 3 16:45:57 bradvo kernel: ivtv0: loaded v4l-cx2341x-enc.fw > firmware > (262144 bytes) > Mar 3 16:45:57 bradvo kernel: ivtv0: loaded v4l-cx2341x-dec.fw > firmware > (262144 bytes) > Mar 3 16:45:57 bradvo kernel: ivtv0: Encoder revision: 0x02040024 > Mar 3 16:45:57 bradvo kernel: ivtv0 warning: Encoder Firmware can be > buggy, use version 0x02040011 or 0x02050032. > Mar 3 16:45:57 bradvo kernel: ivtv0: Decoder revision: 0x02020023 > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA encoder MPEG > stream: > 128 x 32768 buffers (4096KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA encoder YUV stream: > 194 x 10800 buffers (2048KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA encoder VBI stream: > 120 x 17472 buffers (2048KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA encoder PCM audio > stream: 455 x 4608 buffers (2048KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: Create encoder radio stream > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA decoder MPEG > stream: > 16 x 65536 buffers (1024KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA decoder VBI stream: > 512 x 2048 buffers (1024KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: Create decoder VOUT stream > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA decoder YUV stream: > 24 x 43200 buffers (1024KB total) > Mar 3 16:45:57 bradvo kernel: ivtv0: loaded v4l-cx2341x-init.mpg > firmware (155648 bytes) > Mar 3 16:45:57 bradvo kernel: tuner 0-0061: tuner type not set > Mar 3 16:45:57 bradvo kernel: tuner 0-0061: tuner type not set > Mar 3 16:45:57 bradvo kernel: ivtv0: Initialized WinTV PVR 350, > card #0 > Mar 3 16:45:57 bradvo kernel: ivtv: ==================== END INIT > IVTV ==================== > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: Framebuffer module loaded > (attached to ivtv card id 0) > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: screen coords: [0 0] -> [720 > 480] > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: original global alpha = 208 > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: current OSD state = 39 > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: new global alpha = 208 (1 > 255 > 0) > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: framebuffer at 0xe9510000, > mapped to 0xe0010000, size 1665k > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: mode is 720x480x32, > linelength=2880 > Mar 3 16:45:57 bradvo kernel: ivtv0-osd: fb1: cx23415 TV out frame > buffer device > Mar 3 16:45:57 bradvo kernel: ivtv0: Allocate DMA decoder OSD stream: > 16 x 65536 buffers (1024KB total) > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
