I've been at this for months and can never seem to get this right. Now I seem to be missing some firmware but really not sure thought I installed firmware.
I've included the message from dmesg and my modprobe. I'm including the modprobe, but I've never really been sure how to load the changes if I need changes.. Hell I don't even know if the current version of the modprobe.conf have been applied (I rebooted figuring that would apply everything)
alias eth0 forcedeth
alias scsi_hostadapter sata_nv
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
# nvidia kernel module
alias char-major-195 nvidia-1_0-7676
alias nvidia nvidia-1_0-7676
# ivtv (PVR-500MCE)
alias char-major-81 ivtv
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
#alias tveeprom tveeprom-ivtv
#alias tuner tuner-ivtv
#alias tda9887 tda9887-ivtv
#alias msp3400 msp3400-ivtv
ivtv: no version for "struct_module" found: kernel tainted. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.3 (tagged release) loading ivtv: Linux version: 2.6.15-1.1833_FC4 gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 20 sharing vector 0x3A and IRQ 20 ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 8024169 tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv0: This is the first unit of a PVR500 tuner 2-0060: TEA5767 detected. tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. ivtv0: unable to open firmware v4l-cx2341x-enc.fw ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0 warning: failed loading encoder firmware ivtv0 warning: Error loading firmware -3! ivtv0: Error -3 initializing firmware. ivtv0: Error -12 on initialization ivtv: probe of 0000:06:08.0 failed with error -12 ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 21 sharing vector 0x42 and IRQ 21 ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 8024169 tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv0: This is the second unit of a PVR500 ivtv0: Correcting tveeprom data: no radio present on second unit ivtv0: unable to open firmware v4l-cx2341x-enc.fw ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0 warning: failed loading encoder firmware ivtv0 warning: Error loading firmware -3! ivtv0: Error -3 initializing firmware. ivtv0: Error -12 on initialization ivtv: probe of 0000:06:09.0 failed with error -12 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
