-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Gilbert Morton wrote: > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Gilbert Morton > Sent: Thursday, March 02, 2006 11:03 PM > To: [email protected] > Subject: [ivtv-users] PVR-150 Tinny audio > > Hello, > I wanted to post that I am also having the tinny audio as mentioned on the > development list. I want to try to get this fixed or figure out a good work > around > idea. Let me know what I can do to help remedy this. Here is my relevant > information. > I am using the packages as installed by yum from atrpms. It seems to be hit > or miss > as to whether the audio will be tinny. > > Thanks, > Gil > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.4.3 (tagged release) loading > ivtv: Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 > PCI: setting IRQ 5 as level-triggered > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> > IRQ 5 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > tveeprom 2-0050: Hauppauge model 26032, rev C199, serial# 7936570 > tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50) > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 2-0050: audio processor is CX25841 (idx 35) > tveeprom 2-0050: decoder processor is CX25841 (idx 28) > tveeprom 2-0050: has no radio, has IR remote > cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes) > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02040024 > ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or > 0x02050032. > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > tuner 2-0061: type set to 50 (TCL 2002N) > ivtv0: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > > Any ideas on this problem? Is anyone else having this problem? > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > ivtvctl -cstream_type=2 to change the stream type to MPEG always works for me when this happens... if it works and then you have the same problem after a reboot you may want to add it to your local.start - -Matt -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFEECbT0ybjZxByS4URAleUAJ0WswibxoUwgf1flzLtXanJyNKL4wCgpVg+ pPWcAFAeIjT518msJ4cmPc0= =HuyD -----END PGP SIGNATURE----- _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
