Sorry, but that doesn't mean anything. The key is a line like:
tuner 6-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
in the kernel log. If that doesn't appear, then the tuner isn't set.
Hans
On Friday 17 March 2006 00:08, Robert Bungener wrote:
> Hans,
>
> Also I did the following (since I have a Technotrend DVB Card)
>
> ivtvctl -d /dev/video1 -a gives:
>
> ioctl IVTV_IOC_G_CODEC ok
> Codec parameters
> aspect : 2
> audio : 0x00e9
> bframes : 3
> bitrate_mode: 0
> bitrate : 8000000
> bitrate_peak: 9600000
> dnr_mode : 0
> dnr_spatial : 0
> dnr_temporal: 8
> dnr_type : 0
> framerate : 0
> framespergop: 0
> gop_closure : 1
> pulldown : 0
> stream_type : 14
> ioctl VIDIOC_G_FMT ok
> Type : Video Capture
> Width : 720
> Height : 480
> ioctl VIDIOC_QUERYCAP ok
> Driver name : ivtv
> Card type : YUAN PG600/DIAMOND PVR-550 (CX F0000:00:08.0
> Bus info : 0000:00:08.0
> Driver version: 1027
> Capabilities : 0x01070011
> ioctl: VIDIOC_ENUMINPUT
> Input : 0
> Name : Tuner
> Type : 0x00000001
> Audioset: 0x00000003
> Tuner : 0x00000000
> Standard: 0x0000000000003000 ( NTSC )
> Status : 0
>
> Input : 1
> Name : Composite 0
> Type : 0x00000002
> Audioset: 0x00000003
> Tuner : 0x00000000
> Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 2
> Name : Composite 1
> Type : 0x00000002
> Audioset: 0x00000003
> Tuner : 0x00000000
> Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 3
> Name : S-Video 0
> Type : 0x00000002
> Audioset: 0x00000003
> Tuner : 0x00000000
> Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 4
> Name : S-Video 1
> Type : 0x00000002
> Audioset: 0x00000003
> Tuner : 0x00000000
> Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
> Status : 0
> ioctl VIDIOC_G_INPUT ok
> Video input = 0
> ioctl: VIDIOC_ENUMOUTPUT
> ioctl VIDIOC_G_OUTPUT failed: Invalid argument
> ioctl: VIDIOC_ENUMAUDIO
> Input : 0
> Name : Tuner Audio In
>
> Input : 1
> Name : Audio Line In
> ioctl VIDIOC_G_AUDIO ok
> Audio input = 0: Tuner Audio In
> ioctl VIDIOC_G_FREQUENCY ok
> Frequency = 1076
> ioctl: VIDIOC_ENUMSTD
> index : 0
> ID : 0x0000000000003000
> Name : NTSC
> Frame period: 1001/30000
> Frame lines : 525
>
> index : 1
> ID : 0x00000000000000FF
> Name : PAL
> Frame period: 1/25
> Frame lines : 625
>
> index : 2
> ID : 0x00000000007F0000
> Name : SECAM
> Frame period: 1/25
> Frame lines : 625
> ioctl VIDIOC_G_STD ok
> Video standard = 0x00003000
> ioctl: VIDIOC_QUERYCTRL
> Brightness = 128
> Contrast = 64
> Saturation = 64
> Hue = 0
> Volume = 60928
> Mute = 0
>
> seems to me that the tuner is at least recognized ... given input 0
>
> Robert
>
> On Thursday 16 March 2006 01:09, Hans Verkuil wrote:
> > If this doesn't help then I'd like to see the output of i2cdetect
> > -a X where X is the i2c bus number for the ivtv card that you can
> > find with i2cdetect -l. i2cdetect is part of lm-sensors.
> >
> > It may also be that the tuner has to be enabled. So after running
> > i2cdetect for the first time you should run ivtvctl --set-gpio
> > dir=0xffff,val=0xffff and run i2cdetect -a again.
> >
> > Thanks,
> >
> > Hans
> >
> > On Thursday 16 March 2006 08:00, Hans Verkuil wrote:
> > > Please remove (rm) the tveeprom.ko file from /lib/modules/...
> > > Then run rmmod ivtv tveeprom and try again. The PG600 definitely
> > > has no support for tveeprom, so it could be that the tuner is on
> > > the same i2c address as the tveeprom usually is. Hence the tuner
> > > is misdetected as a tveeprom.
> > >
> > > Hans
> > >
> > > On Thursday 16 March 2006 02:06, Robert Bungener wrote:
> > > > Hans,
> > > >
> > > > Sorry to bother again.
> > > >
> > > > I did the whole trunk thing and the dvb stuff and got
> > > > everything compiled as should without errors !!
> > > > the dmesg gives:
> > > > ivtv: ==================== START INIT IVTV
> > > > ==================== ivtv: version 0.4.3 (tagged release)
> > > > loading
> > > > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS
> > > > gcc-4.0 ivtv: In case of problems please include the debug
> > > > info between ivtv: the START INIT IVTV and END INIT IVTV
> > > > lines, along with ivtv: any module options, when mailing the
> > > > ivtv-users mailinglist. ivtv0: User specified YUAN
> > > > PG600/DIAMOND PVR-550 (CX FALCON2) card (detected cx23416 based
> > > > chip)
> > > > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11
> > > > (level, low) -> IRQ 11
> > > > tveeprom: Encountered bad packet header [ff]. Corrupt or not a
> > > > Hauppauge eeprom.
> > > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> > > > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > > > cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> > > > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> > > > ivtv0: Could not detect tuner standard, defaulting to NTSC.
> > > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > > > ivtv0: Encoder revision: 0x02050032
> > > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers
> > > > (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x
> > > > 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI
> > > > stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA
> > > > encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
> > > > ivtv0 warning: i2c client addr: 0x00 not found for command
> > > > 0x40045403! cx25840 2-0044: 0x0000 is not a valid video input!
> > > > ivtv0 warning: i2c client addr: 0x00 not found for command
> > > > 0x40085618! ivtv0 warning: i2c client addr: 0x00 not found for
> > > > command 0x402c5639! ivtv0: Initialized YUAN PG600/DIAMOND
> > > > PVR-550 (CX FALCON2), card #0 ivtv: ==================== END
> > > > INIT IVTV ====================
> > > >
> > > > This is with the mdoprobe.conf as :
> > > > # ivtv modules setup
> > > > alias char-major-81 dvb-ttpci
> > > > alias char-major-81-0 ivtv
> > > > options ivtv cardtype=7 tuner=71
> > > > options msp3400 once=0 simpler=1 simple=0
> > > >
> > > > To me it seems that the tuner is not working or the firmware
> > > > has a hickup ?? I tried also with the shipped Falcon2 firmware
> > > > but that just gives me more errors
> > > > dmesg with that gives:
> > > > ivtv: ==================== START INIT IVTV
> > > > ==================== ivtv: version 0.4.3 (tagged release)
> > > > loading
> > > > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS
> > > > gcc-4.0 ivtv: In case of problems please include the debug
> > > > info between ivtv: the START INIT IVTV and END INIT IVTV
> > > > lines, along with ivtv: any module options, when mailing the
> > > > ivtv-users mailinglist. ivtv0: User specified YUAN
> > > > PG600/DIAMOND PVR-550 (CX FALCON2) card (detected cx23416 based
> > > > chip)
> > > > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11
> > > > (level, low) -> IRQ 11
> > > > tveeprom: Encountered bad packet header [ff]. Corrupt or not a
> > > > Hauppauge eeprom.
> > > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> > > > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > > > cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> > > > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> > > > ivtv0: Could not detect tuner standard, defaulting to NTSC.
> > > > ivtv0: unable to open firmware v4l-cx2341x-enc.fw
> > > > ivtv0: did you put the firmware in the hotplug firmware
> > > > directory? ivtv0 warning: failed loading encoder firmware
> > > > ivtv0 warning: Error loading firmware -3!
> > > > ivtv0: Error -3 initializing firmware.
> > > > ivtv0: Error -12 on initialization
> > > > ivtv: probe of 0000:00:08.0 failed with error -12
> > > > ivtv: ==================== END INIT IVTV
> > > > ====================
> > > >
> > > > My guess is that the tveeprom sw has an issue ??? Anyway to
> > > > test that ??
> > > >
> > > > If you want to take this off list that is OK with me as well
> > > > ...
> > > >
> > > > Robert ([EMAIL PROTECTED] -- though in Mexico at the moment)
> > > >
> > > > On Wednesday 15 March 2006 13:24, Hans Verkuil wrote:
> > > > > This tuner is supported, but only in the v4l repository. It
> > > > > isn't even in the upcoming 2.6.16 kernel.
> > > > >
> > > > > That means that you are forced to use the 'trunk' of the ivtv
> > > > > subversion repository. See
> > > > > http://www.ivtvdriver.org/index.php/Svn_checkout on how to do
> > > > > it. Also read the README.1ST in the checked out ivtv
> > > > > directory.
> > > > >
> > > > > Then use ivtv module option tuner=71 to select the XCeive
> > > > > tuner. You also need the tuner's firmware. Put it with the
> > > > > other ivtv firmwares and use the filename xceive_xc_3028.fw.
> > > > > The firmware should be part of the Windows driver (something
> > > > > like cxxc.rom).
> > > > >
> > > > > I hope that will get it to work.
> > > > >
> > > > > Hans
> > > > >
> > > > > On Wednesday 15 March 2006 20:12, Robert Bungener wrote:
> > > > > > Ok Hans,
> > > > > >
> > > > > > I looked at the board last night and I found the following
> > > > > > chips
> > > > > >
> > > > > > CX23416-2
> > > > > > CX25843-23
> > > > > > XCEIVE AC2828 or RC2828 (can't read the letters they are
> > > > > > too damn small And some kind of mem chip ...
> > > > > >
> > > > > > Robert
> > > > > >
> > > > > > On Tuesday 14 March 2006 17:18, Hans Verkuil wrote:
> > > > > > > Hmm, I wonder if you have somewhat different hardware.
> > > > > > >
> > > > > > > Can you make a list of the chips on the card and also of
> > > > > > > the tuner name? For the latter you probably have to
> > > > > > > gently peel off the label in order to read the tuner type
> > > > > > > underneath.
> > > > > > >
> > > > > > > Hans
> > > > > > >
> > > > > > > On Wednesday 15 March 2006 00:10, Robert Bungener wrote:
> > > > > > > > OK got that fixed ...
> > > > > > > >
> > > > > > > > modprobe cardtype=7 radio=1
> > > > > > > > still missing some tuner info
> > > > > > > >
> > > > > > > > modprobe.conf has:
> > > > > > > > # ivtv modules setup
> > > > > > > > alias char-major-81 ivtv
> > > > > > > > alias char-major-81 videodev
> > > > > > > > alias char-major-81-0 ivtv
> > > > > > > > options ivtv tuner=2
> > > > > > > > options msp3400 once=0 simpler=1 simple=0
> > > > > > > >
> > > > > > > > dmesg gives:
> > > > > > > > ivtv: ==================== START INIT IVTV
> > > > > > > > ==================== ivtv: version 0.4.3 (tagged
> > > > > > > > release) loading
> > > > > > > > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM
> > > > > > > > 4KSTACKS gcc-4.0 ivtv: In case of problems please
> > > > > > > > include the debug info between ivtv: the START INIT
> > > > > > > > IVTV and END INIT IVTV lines, along with ivtv: any
> > > > > > > > module options, when mailing the ivtv-users
> > > > > > > > mailinglist. ivtv0: User specified YUAN PG600/DIAMOND
> > > > > > > > PVR-550 (CX FALCON2) card (detected cx23416 based chip)
> > > > > > > > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] ->
> > > > > > > > GSI 11 (level, low) -> IRQ 11
> > > > > > > > tveeprom: Encountered bad packet header [ff]. Corrupt
> > > > > > > > or not a Hauppauge eeprom.
> > > > > > > > ivtv0: i2c attach to card #0 ok [client=tveeprom,
> > > > > > > > addr=50] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv
> > > > > > > > i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw
> > > > > > > > firmware (14264 bytes) ivtv0: i2c attach to card #0 ok
> > > > > > > > [client=cx25840, addr=44] ivtv0: Could not detect tuner
> > > > > > > > standard, defaulting to NTSC. ivtv0: loaded
> > > > > > > > v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0:
> > > > > > > > Encoder revision: 0x02050032
> > > > > > > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
> > > > > > > > buffers (4096KB total) ivtv0: Allocate DMA encoder YUV
> > > > > > > > stream: 194 x 10800 buffers (2048KB total) ivtv0:
> > > > > > > > Allocate DMA encoder VBI stream: 120 x 17472 buffers
> > > > > > > > (2048KB total) ivtv0: Allocate DMA encoder PCM audio
> > > > > > > > stream: 455 x 4608 buffers (2048KB total) ivtv0: Create
> > > > > > > > encoder radio stream ivtv0 warning: i2c client addr:
> > > > > > > > 0x00 not found for command 0x40045403! ivtv0 warning:
> > > > > > > > i2c client addr: 0x00 not found for command 0x40085618!
> > > > > > > > ivtv0 warning: i2c client addr: 0x00 not found for
> > > > > > > > command 0x402c5639! ivtv0: Initialized YUAN
> > > > > > > > PG600/DIAMOND PVR-550 (CX FALCON2), card #0 ivtv:
> > > > > > > > ==================== END INIT IVTV
> > > > > > > > ====================
> > > > > > > >
> > > > > > > > More info, I specified tuner=2 but that was only on the
> > > > > > > > "Howto" part. I could not find a list with the
> > > > > > > > available options ...
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Robert
> > > > > > > >
> > > > > > > > On Tuesday 14 March 2006 15:01, Hans Verkuil wrote:
> > > > > > > > > Run with ivtv module option cardtype=7. That should
> > > > > > > > > work. The card is misdetected as a PVR250, a
> > > > > > > > > different card altogether.
> > > > > > > > >
> > > > > > > > > Yuan makes a mess of their vendor IDs :-(
> > > > > > > > >
> > > > > > > > > Hans
> > > > > > > > >
> > > > > > > > > On Tuesday 14 March 2006 21:48, Robert Bungener wrote:
> > > > > > > > > > Hello list,
> > > > > > > > > >
> > > > > > > > > > I have a Yuan PG600 and some problems to get it to
> > > > > > > > > > work ...
> > > > > > > > > >
> > > > > > > > > > yummed all the ivtv parts for FC4
> > > > > > > > > >
> > > > > > > > > > lspci -v gives:
> > > > > > > > > > 00:08.0 Multimedia video controller: Internext
> > > > > > > > > > Compression Inc iTVC16 (CX23416) MPEG-2 Encoder
> > > > > > > > > > (rev 01) Subsystem: Unknown device ffab:0600
> > > > > > > > > > Flags: bus master, medium devsel,
> > > > > > > > > > latency 64, IRQ 11 Memory at dc000000 (32-bit,
> > > > > > > > > > prefetchable) [size=64M] Capabilities: [44] Power
> > > > > > > > > > Management version 2
> > > > > > > > > >
> > > > > > > > > > dmesg gives:
> > > > > > > > > > ivtv: ==================== START INIT IVTV
> > > > > > > > > > ==================== ivtv: version 0.4.3 (tagged
> > > > > > > > > > release) loading
> > > > > > > > > > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM
> > > > > > > > > > 4KSTACKS gcc-4.0 ivtv: In case of problems please
> > > > > > > > > > include the debug info between ivtv: the START
> > > > > > > > > > INIT IVTV and END INIT IVTV lines, along with ivtv:
> > > > > > > > > > any module options, when mailing the ivtv-users
> > > > > > > > > > mailinglist. ivtv0: Unknown card: vendor/device:
> > > > > > > > > > 4444/0016 ivtv0:
> > > > > > > > > > subsystem vendor/device: ffab/0600 ivtv0:
> > > > > > > > > > cx23416 based
> > > > > > > > > > ivtv0: Defaulting to WinTV PVR 250 card
> > > > > > > > > > ivtv0: Please mail the vendor/device and subsystem
> > > > > > > > > > vendor/device IDs and what kind of
> > > > > > > > > > ivtv0: card you have to the ivtv-devel mailinglist
> > > > > > > > > > (www.ivtvdriver.org) ivtv0: Prefix your subject
> > > > > > > > > > line with [UNKNOWN CARD].
> > > > > > > > > > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA]
> > > > > > > > > > -> GSI 11 (level, low) -> IRQ 11
> > > > > > > > > > tveeprom: Encountered bad packet header [ff].
> > > > > > > > > > Corrupt or not a Hauppauge eeprom.
> > > > > > > > > > ivtv0: i2c attach to card #0 ok [client=tveeprom,
> > > > > > > > > > addr=50] ivtv0: No tuner detected, default to NTSC
> > > > > > > > > > ivtv0 warning: i2c client addr: 0x21 not found for
> > > > > > > > > > command 0x8004646b! ivtv0: loaded
> > > > > > > > > > v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0:
> > > > > > > > > > Encoder revision: 0x02050032
> > > > > > > > > > ivtv0: Allocate DMA encoder MPEG stream: 128 x
> > > > > > > > > > 32768 buffers (4096KB total) ivtv0: Allocate DMA
> > > > > > > > > > encoder YUV stream: 194 x 10800 buffers (2048KB
> > > > > > > > > > total) ivtv0: Allocate DMA encoder VBI stream: 120
> > > > > > > > > > x 17472 buffers (2048KB total) ivtv0: Allocate DMA
> > > > > > > > > > encoder PCM audio stream: 455 x 4608 buffers
> > > > > > > > > > (2048KB total) ivtv0 warning: i2c client addr: 0x00
> > > > > > > > > > not found for command 0x40045403! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x21 not found for command
> > > > > > > > > > 0x40085618! ivtv0 warning: i2c client addr: 0x21
> > > > > > > > > > not found for command 0xc0045627! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x40 not found for command
> > > > > > > > > > 0x40086d11! ivtv0 warning: i2c client addr: 0x40
> > > > > > > > > > not found for command 0x80287610! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x40 not found for command
> > > > > > > > > > 0x40287611! ivtv0 warning: i2c client addr: 0x00
> > > > > > > > > > not found for command 0x40085618! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x40 not found for command
> > > > > > > > > > 0x40085618! ivtv0 warning: i2c client addr: 0x21
> > > > > > > > > > not found for command 0x40085618! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x40 not found for command
> > > > > > > > > > 0x80287610! ivtv0 warning: i2c client addr: 0x40
> > > > > > > > > > not found for command 0x40287611! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x21 not found for command
> > > > > > > > > > 0x40045613! ivtv0 warning: i2c client addr: 0x00
> > > > > > > > > > not found for command 0x402c5639! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x40 not found for command
> > > > > > > > > > 0x402c5639! ivtv0 warning: i2c client addr: 0x21
> > > > > > > > > > not found for command 0x40045612! ivtv0 warning:
> > > > > > > > > > i2c client addr: 0x40 not found for command
> > > > > > > > > > 0x80287610! ivtv0 warning: i2c client addr: 0x40
> > > > > > > > > > not found for command 0x40287611! ivtv0:
> > > > > > > > > > Initialized WinTV PVR 250, card #0 ivtv:
> > > > > > > > > > ==================== END INIT IVTV
> > > > > > > > > > ====================
> > > > > > > > > >
> > > > > > > > > > As I mentioned I reinstalled the firmware parts as
> > > > > > > > > > per the "Howto" and some got better. But still
> > > > > > > > > > gives me a bunch of problems.
> > > > > > > > > >
> > > > > > > > > > Any pointers ??
> > > > > > > > >
> > > > > > > > > _______________________________________________
> > > > > > > > > ivtv-users mailing list
> > > > > > > > > [email protected]
> > > > > > > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > ivtv-users mailing list
> > > > > > > [email protected]
> > > > > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> > > > >
> > > > > _______________________________________________
> > > > > ivtv-users mailing list
> > > > > [email protected]
> > > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> > >
> > > _______________________________________________
> > > ivtv-users mailing list
> > > [email protected]
> > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
