Oh, lspci -vvvxxx -s 00:08.0, is a little more helpful:
0000:00:08.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 20000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 44 44 16 00 06 00 10 82 01 00 00 04 08 40 00 00
10: 08 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 03 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 80 08
40: ff ef 00 00 01 00 02 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-----Original Message-----
From: "Sean Neeley" <[EMAIL PROTECTED]>
To: [email protected]
Date: Sun, 19 Mar 2006 10:08:03 -0600
Subject: Re: [ivtv-users] need help with my Hauppauge pvr-150
I turned off ACPI and now I get a message about a buggy MP table. How do I fix
this?:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
PCI: No IRQ known for interrupt pin A of device 0000:00:08.0. Probably buggy MP
table.
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0 warning: i2c client addr: 0x50 not found for command 0x0!
ivtv0: Error -19 reading Hauppauge eeprom.
ivtv0: Possible causes: the tveeprom module was not loaded, or
ivtv0: the eeprom kernel module was loaded before the tveeprom module.
ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
ivtv0: Could not detect tuner standard, defaulting to NTSC.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0 warning: Encoder mailbox not found
ivtv0 warning: Decoder mailbox not found
ivtv0: Error locating firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:00:08.0 failed with error -12
ivtv: ==================== END INIT IVTV ====================
lspci -vxxx -s 00:80.0:
0000:00:08.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8003
Flags: bus master, medium devsel, latency 64
Memory at 20000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
00: 44 44 16 00 06 00 10 82 01 00 00 04 08 40 00 00
10: 08 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 03 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 80 08
40: ff ef 00 00 01 00 02 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Please help! Thanks.
- Sean
-----Original Message-----
From: "Myth User" <[EMAIL PROTECTED]>
To: "User discussion about IVTV" <[email protected]>
Date: Sat, 18 Mar 2006 20:12:34 -0500
Subject: Re: [ivtv-users] need help with my Hauppauge pvr-150
"ACPI: PCI Interrupt 0000:00:08.0[Q]: no GSI"
Try turning off ACPI in your BIOS and see if all works.
----- Original Message -----
From: "Sean Neeley" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, March 18, 2006 8:07 PM
Subject: [ivtv-users] need help with my Hauppauge pvr-150
> I just tried installing KnoppMyth R5 Beta 7 and I'm getting error message
from the IVTV module. I had the same problems with KnoppMyth A30.2. I'm
banging my head against the wall and about to give up. Could someone please
help me out? I'm a newbie and don't know what to try.
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.3 (tagged release) loading
> ivtv: Linux version: 2.6.15-chw-2 SMP preempt 586 gcc-3.3
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:00:08.0[Q]: no GSI
> ivtv0: Unreasonably low latency timer, setting to 64 (was 48)
> ivtv0 warning: i2c client addr: 0x50 not found for command 0x0!
> ivtv0: Error -19 reading Hauppauge eeprom.
> ivtv0: Possible causes: the tveeprom module was not loaded, or
> ivtv0: the eeprom kernel module was loaded before the tveeprom module.
> ivtv0 warning: i2c client addr: 0x44 not found for command 0xc008561c!
> ivtv0: Could not detect tuner standard, defaulting to NTSC.
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv0: Error locating firmware.
> ivtv0: Error -12 on initialization
> ivtv: probe of 0000:00:08.0 failed with error -12
> ivtv: ==================== END INIT IVTV ====================
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
