Did you remove the old ivtv
tuner/tveeprom/msp3400/cx25840/wm8775/saa7115/saa7127 drivers from
/lib/module? Did you compile the kernel with those drivers enabled? The
options 'Add support for additional audio chipsets' and 'Add support for
additional video chipsets' must be turned on in the kernel config.
You are definitely working with the wrong modules. I'll have to update the
README with this information, I'm so used to using the kernel modules that
I didn't realize that this was going to be a problem. Let me know if this
solves the problem.
Hans
> Hi
>
> Thanks for the quick 0.6.0 release for linux 2.6.16. It doesn't work for
> me, though. I'm using MythTV 0.19 with a PVR-350 for Tuner input and
> TV-OUT (using ivtv xdriver and Xorg 7.0) on x86.
>
> The system worked perfectly fine with ivtv 0.4.3 and linux 2.6.15.6. If
> you need any additional information, I'd be happy to provide them.
>
> When loading the ivtv driver (via udev rule), I get the following
> badness:
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.6.0 (tagged release) loading
> ivtv: Linux version: 2.6.16-paldo3 SMP preempt PENTIUMIII REGPARM gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
> ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22
> tveeprom 1-0050: Encountered bad packet header [87]. Corrupt or not a
> Hauppauge eeprom.
> ivtv0: No tuner detected, default to NTSC
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> msp3400 1-0040: MSP18431O-C31 found @ 0x80 (ivtv i2c driver #0)
> msp3400 1-0040: MSP18431O-C31 supports radio, mode is autodetect and
> autoselect
> msp3400 1-0044: [EMAIL PROTECTED] found @ 0x88 (ivtv i2c driver #0)
> msp3400 1-0044: [EMAIL PROTECTED] supports radio, mode is autodetect and
> autoselect
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Decoder revision: 0x02020023
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
