I searched the mythtv users and ivtv list wiout a definite solution so far. So, decided to post it. I am installed mythtv as per wilsonet howto and worked perfectly fine untill I rebooted the system with the initrd change. The boot process pauses for a long while and then complains like:
ivtv-osd:ivtv_fb_card parameter is out of range valid range (0--1) insmod: error inserting /lib/ivtv-fb.ko -1 operation not permitted The output of the /var/log/messages looks like below. If anybody has already solved this problem, I would really appreciate sharing the solution. Thanks Praveen Mar 22 11:58:31 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Mar 22 11:58:31 localhost ntpdate[1892]: can't find host 0.pool.ntp.org Mar 22 11:58:31 localhost kernel: ivtv: version 0.4.4 (development snapshot compiled on Wed Mar 15 06:14:19 2006) loading Mar 22 11:58:31 localhost ntpdate[1892]: can't find host 1.pool.ntp.org Mar 22 11:58:31 localhost kernel: ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0 Mar 22 11:58:31 localhost ntpdate[1892]: can't find host 2.pool.ntp.org Mar 22 11:58:31 localhost kernel: ivtv: In case of problems please include the debug info between Mar 22 11:58:31 localhost ntpdate[1892]: can't find host clock.redhat.com Mar 22 11:58:31 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Mar 22 11:58:31 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Mar 22 11:58:32 localhost kernel: ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) Mar 22 11:58:32 localhost kernel: PCI: Enabling device 0000:00:0e.0 (0114 -> 0116) Mar 22 11:58:32 localhost kernel: PCI: Found IRQ 10 for device 0000:00:0e.0 Mar 22 11:58:32 localhost kernel: tveeprom: ivtv version Mar 22 11:58:32 localhost kernel: tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7775560 Mar 22 11:58:32 localhost kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) Mar 22 11:58:32 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Mar 22 11:58:32 localhost kernel: tveeprom: audio processor = MSP4448 (type = 1b) Mar 22 11:58:32 localhost kernel: tveeprom: decoder processor = SAA7115 (type = 13) Mar 22 11:58:32 localhost kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] Mar 22 11:58:32 localhost kernel: msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler Mar 22 11:58:32 localhost kernel: ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] Mar 22 11:58:32 localhost kernel: msp3400 0-0040: msp34xxg daemon started Mar 22 11:58:32 localhost kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) Mar 22 11:58:32 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] Mar 22 11:58:32 localhost kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Mar 22 11:58:32 localhost kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Mar 22 11:58:32 localhost kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) Mar 22 11:58:32 localhost kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] Mar 22 11:58:32 localhost kernel: input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 Mar 22 11:58:32 localhost kernel: ivtv0: unable to open firmware v4l- cx2341x-enc.fw Mar 22 11:58:32 localhost kernel: ivtv0: did you put the firmware in the hotplug firmware directory? Mar 22 11:58:32 localhost kernel: ivtv0 warning: failed loading encoder firmware Mar 22 11:58:32 localhost kernel: ivtv0 warning: Error loading firmware -3! Mar 22 11:58:32 localhost kernel: ivtv0: Error -3 initializing firmware. Mar 22 11:58:32 localhost kernel: ivtv0: Error -12 on initialization Mar 22 11:58:32 localhost kernel: ivtv: probe of 0000:00:0e.0 failed with error -12 Mar 22 11:58:32 localhost kernel: ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
