Sorry about the noise.. got it now.. ivtvctl -f width=640,height=480 does the trick..
/Steffen On 25.03.2006 20:33:15 +0100, Steffen Schumacher wrote: > Hi! > > I get 0-size files from cat /dev/video0 > dwaa.mpeg > I cant read video0 from any 'players' also. > > Don't know if I'm missing anything - the driver looks > ok asides from this: > cx25840 0-0044: 768x576 is not a valid size! > cx25840 0-0044: 768x480 is not a valid size! > cx25840 0-0044: 768x480 is not a valid size! > > in dmesg. > > Contents of the ivtv section: > Linux video capture interface: v1.00 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.4.4 (development snapshot compiled on Wed Mar 15 06:14:19 > 2006) loading > ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> > IRQ 10 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom: ivtv version > tveeprom: Hauppauge: model = 26559, rev = F089, serial# = 9362648 > tveeprom: tuner = TCL MFPE05 2 (idx = 89, type = 38) > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, > v4l2 = 0x00400e17) > tveeprom: audio processor = CX25843 (type = 25) > tveeprom: decoder processor = CX25843 (type = 1e) > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > cx25840 0-0044: ivtv driver > cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 0-0044: loaded v4l-cx25840.fw firmware (13353 bytes) > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02040024 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c > driver #0 > ivtv0: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > So I see no problems aside from the cx25840 res problem. > I have now clue on how to set res, or what to set it to. > > Please help! > > /Steffen > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
