Hi,
I am having some issues getting a PVR-350 working on Debian sarge...
when I run ivtvctl -I I get...
#####
check SAA7115 input signal
ioctl: VIDEO_STATUS = Bad
SAA7115 reg[STATUS#1 - 0x1E] = 50
Color Standard (D0-D1): BW/No color
White peak loop (D2): Not activated
Gain value for act.lum. (min) (D3): Not limited
Gain value for act.lum. (max) (D4): Limited
WIPA-mode slow-time constant (D5): Not activated
Horizontal frequency (D6): Unlocked
Field length (D7): Non-standard
SAA7115 reg[STATUS#2 - 0x1F] = c0
Ready for capture (D0): No
Macrovision 7.01 (D1): No
MV Colorstripe burst (D2): No
MV Colorstripe burst type 3 (D3): No
Input signal timebase (D4): Non-stable (VCR)
Field frequency (D5): 50Hz
H & V loops (D6): Unlocked
Interlace (D7): Detected
#####
heres the output of ivtvctl -a
#####
ioctl IVTV_IOC_G_CODEC ok
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 9600000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 8
dnr_type : 0
framerate : 0
framespergop: 12
gop_closure : 1
pulldown : 0
stream_type : 14
ioctl VIDIOC_G_FMT ok
Type : Video Capture
Width : 720
Height : 576
ioctl VIDIOC_QUERYCAP ok
Driver name : ivtv
Card type : WinTV PVR 350
Bus info : 00:01.0
Driver version: 1027
Capabilities : 0x010700F3
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Composite 0
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 1
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : Composite 3
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 4
Name : Tuner 0
Type : 0x00000001
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000000000FF ( PAL )
Status : 0
Input : 5
Name : Composite 4
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 6
Name : S-Video 0
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 7
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 8
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 9
Name : S-Video 3
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
ioctl VIDIOC_G_INPUT ok
Video input = 4
ioctl: VIDIOC_ENUMOUTPUT
Output : 0
Name : S-Video + Composite
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Output : 1
Name : Composite
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Output : 2
Name : S-Video
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Output : 3
Name : RGB
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Output : 4
Name : YUV C
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Output : 5
Name : YUV V
Type : 0x00000002
Audioset: 0x00000001
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
ioctl VIDIOC_G_OUTPUT ok
Output = 0
ioctl: VIDIOC_ENUMAUDIO
Input : 0
Name : Tuner Audio In
Input : 1
Name : Audio Line In
ioctl VIDIOC_G_AUDIO ok
Audio input = 0: Tuner Audio In
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 6400
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x0000000000003000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
index : 1
ID : 0x00000000000000FF
Name : PAL
Frame period: 1/25
Frame lines : 625
index : 2
ID : 0x00000000007F0000
Name : SECAM
Frame period: 1/25
Frame lines : 625
ioctl VIDIOC_G_STD ok
Video standard = 0x000000ff
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 0
Mute = 0
#####
output of ivtv-detect
#####
driver: ivtv-0.4.3 (tagged release)
card: WinTV PVR 350, bus info 00:01.0, ivtv card #0
hardware: saa7115 saa7127 msp34xx tda9887 tveeprom
/dev/video0: MPG encoding (links: /dev/video)
/dev/radio0: Radio (links: /dev/radio)
/dev/vbi0: VBI encoding (links: /dev/vbi)
/dev/vbi4: VBI from MPG
/dev/vbi8: VBI decoding
/dev/video16: MPG decoding
/dev/video24: PCM encoding
/dev/video32: YUV encoding
/dev/video48: YUV decoding
#####
also... heres my dmesg output...
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.4.27-2-386
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
i2c-core.o: driver tveeprom registered.
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 2962355
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2
= 0x00400e17)
tveeprom: audio processor = MSP4418 (type = 19)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
i2c-core.o: client [tveeprom] registered to adapter [ivtv i2c driver #0](pos.
0).
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
i2c-core.o: client [(tuner unset)] registered to adapter [ivtv i2c driver
#0](pos. 1).
i2c-core.o: driver saa7115 registered.
saa7115 0-0021: ivtv driver
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
i2c-core.o: client [saa7115] registered to adapter [ivtv i2c driver #0](pos. 2).
i2c-core.o: driver saa7127 registered.
saa7127 0-0044: ivtv driver
saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
i2c-core.o: client [saa7127] registered to adapter [ivtv i2c driver #0](pos. 3).
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3418W-B3 +nicam +simple +radio
msp3410: daemon started
ivtv0: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40]
i2c-core.o: client [MSP3418W-B3] registered to adapter [ivtv i2c driver
#0](pos. 4).
i2c-core.o: driver i2c tda9887 driver registered.
tda9887: chip found @ 0x86
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
i2c-core.o: client [tda9887] registered to adapter [ivtv i2c driver #0](pos. 5).
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
I have an antenna connected to the Tuner card, and I am trying to use it...
I have changed the channels using ivtv-tune, and nothing worked.
I am in New Zealand, so using PAL system...
When I try "cat /dev/video0 > /tmp/out.mpg" the resulting file is just blank...
also, when using "vls" I get:
#####
kernel: ivtv0 warning: ENC: MPG copy to user failed addr 0xe52f0000 bytes
0x00008000
kernel: ivtv0 warning: ENC: write Requeue data -14 188 ret
#####
dont know whats going on!!! :(
sorry for the large message, but yea... I cant figure it out... also... I could
find NOTHING about the above error which occurs with "vls"...
thanks
Antonio Broughton
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
