It definitely appears to find both cards correctly.  Here are the dmesg, modprobe and lspci.

 

 

Thanks again!

 

Jared Isch

[EMAIL PROTECTED]

 


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Keith C
Sent: Monday, March 27, 2006 9:58 PM
To: User discussion about IVTV
Subject: Re: [ivtv-users] Hauppauge 250 and 500 Low sound volume 250.

 

On Mar 27, 2006, at 2:12 PM, Jared Isch wrote:



I am at a loss right now.  Basically I have 2 cards a 250 and a 500.  I believe I only installed the ivtv for the 500, both cards are detected and for the most part work.  The sound volume on the 250 is extremely low and the colors are way off (colors I can adjust). I am not sure if maybe I just didn’t install these correctly, maybe use the 250/350 driver for 1 card and the 150/500 for the other?  And if this is the case, is there a place I can get some more instruction on setting different drivers for the two cards?

 

You can only have one instance of ivtv loaded, but it should correctly identify and handle both cards in your system just fine.  Please post the ivtv information from dmesg, plus anything you have in modprobe.conf and we can help figure out any problems you're having.

 

Keith

 


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.2/293 - Release Date: 3/26/2006


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.2/294 - Release Date: 3/27/2006

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Inte
rface (rev 02)
        Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interf
ace
        Flags: bus master, fast devsel, latency 0
        Memory at 58000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [e4] Vendor Specific Information
        Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
 (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 32
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: fc000000-fdffffff
        Prefetchable memory behind bridge: e0000000-e7ffffff

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 225
        I/O ports at cc00 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 185
        I/O ports at d000 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 169
        I/O ports at d400 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #4 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 225
        I/O ports at d800 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Cont
roller (rev 02) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 217
        Memory at fe100000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Nor
mal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fe000000-fe0fffff
        Prefetchable memory behind bridge: e8000000-f3ffffff

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Brid
ge (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 169
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at ffa0 [size=16]
        Memory at 50000000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
 (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 169
        I/O ports at ec00 [size=8]
        I/O ports at e800 [size=4]
        I/O ports at e400 [size=8]
        I/O ports at e000 [size=4]
        I/O ports at dc00 [size=16]

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 0
2)
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: medium devsel, IRQ 3
        I/O ports at c800 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) A
C'97 Audio Controller (rev 02)
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 0, IRQ 193
        Memory at fe100400 (32-bit, non-prefetchable) [size=512]
        Memory at fe100800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900XT] (
rev a1) (prog-if 00 [VGA])
        Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 225
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at fd000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 3.0

02:01.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode
) (rev 11) (prog-if 00 [Normal decode])
        Flags: bus master, medium devsel, latency 32
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
        Memory behind bridge: 54000000-57ffffff
        Prefetchable memory behind bridge: e8000000-efffffff
        Capabilities: [80] Power Management version 2
        Capabilities: [90] #06 [0000]

02:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN
Controller (rev 02)
        Subsystem: Linksys: Unknown device 0013
        Flags: bus master, fast devsel, latency 32, IRQ 185
        Memory at fe000000 (32-bit, non-prefetchable) [size=8K]

02:04.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250
        Flags: bus master, medium devsel, latency 64, IRQ 169
        Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

02:07.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61) (prog-if 10 [OHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 32, IRQ 193
        Memory at fe002000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controlle
r (rev 01)
        Subsystem: Intel Corporation D865PERL mainboard
        Flags: bus master, medium devsel, latency 32, IRQ 177
        Memory at fe003000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at bc00 [size=64]
        Capabilities: [dc] Power Management version 2

03:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e807
        Flags: bus master, medium devsel, latency 64, IRQ 201
        Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

03:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device e817
        Flags: bus master, medium devsel, latency 64, IRQ 209
        Memory at ec000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
alias char-major-61 lirc_i2c
alias eth0 e100
alias scsi_hostadapter ata_piix
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/
modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias ieee1394-controller ohci1394
alias wlan0 ndiswrapper
alias char-major-81 ivtv
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-81-2 ivtv
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.3 (tagged release) loading
ivtv:  Linux version: 2.6.15-1.1830_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 18 (level, low) -> IRQ 169
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom 1-0050: Hauppauge model 32032, rev B326, serial# 7109662
tveeprom 1-0050: tuner model is Temic 4036FY5 (idx 26, type 8)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP4448 (idx 27)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp3400 1-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler
msp3400 1-0040: msp34xxg daemon started
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x020500
32.
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 1-0061: type set to 8 (Temic NTSC (4036 FY5))
ivtv0: Initialized WinTV PVR 250, card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 22 (level, low) -> IRQ 201
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner 2-0060: TEA5767 detected.
tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]
tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 8063643
tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type
 62)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR remote
ivtv1: This is the first unit of a PVR500
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
ivtv1: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02040024
ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x020500
32.
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv1: Create encoder radio stream
tuner 2-0061: type set to 57 (Philips FQ1236A MK4)
ivtv1: Initialized WinTV PVR 500 (unit #1), card #1
ivtv:  ======================  NEXT CARD  ======================
ivtv2: Autodetected WinTV PVR 150 card (cx23416 based)
PCI: Enabling device 0000:03:09.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 21 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:03:09.0 to 64
ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50]
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61]
tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43]
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
cx25840 3-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44]
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b]
tveeprom 3-0050: Hauppauge model 23552, rev D492, serial# 8063643
tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type
 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio, has no IR remote
ivtv2: This is the second unit of a PVR500
ivtv2: Correcting tveeprom data: no radio present on second unit
ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv2: Encoder revision: 0x02040024
ivtv2 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x020500
32.
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 3-0061: type set to 57 (Philips FQ1236A MK4)
ivtv2: Initialized WinTV PVR 500 (unit #2), card #2
ivtv:  ====================  END INIT IVTV  ====================
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to