Hi,
I am in the process of setting up MythTV with a Hauppage PVR-350… So far so good. I have X showing up on my TV and the tuner and everything works. There are two problems:
1) the colours are wrong (it's like they are inverted) desktop should be blue, but looks yellowish brown
2) the picture is shifted. The right part of the screen shows up on the left side, and there is a big black vertical stripe 1/3 of the way from the left
I am using the latest FC5 (2.6.16-1.2080_FC5) and all the latest drivers obtained using yum.
I found a posting that described what seems to be my display problems, but when I try what is suggested as the fix, I get this:
[EMAIL PROTECTED] etc]# ivtvctl -j reg=0x6c,val=0xfa -d /dev/video16
ioctl IVTV_IOC_S_ENCODER_REG failed: Invalid argument
Any help will be greatly appreciated!...I have included the relevant dmesg info below.
ivtv: no version for "struct_module" found: kernel tainted.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.1 (development snapshot compiled on Wed Mar 29 17:11:32 2006) loading
ivtv: Linux version: 2.6.16-1.2080_FC5 686 REGPARM 4KSTACKS gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 16 (level, low) -> IRQ 18
tveeprom 3-0050: Hauppauge model 48132, rev K268, serial# 8376294
tveeprom 3-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is MSP4448 (idx 27)
tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
tveeprom 3-0050: has radio, has IR remote
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #0)
saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect
USB Universal Host Controller Interface driver v2.3
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 3-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
[EMAIL PROTECTED] etc]# ivtvctl -j reg=0x6c,val=0xfa -d /dev/video16
ioctl IVTV_IOC_S_ENCODER_REG failed: Invalid argument
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
