I am using the ivtv drivers with MythTV and the system had been stable since June and working flawlessly...then a week or so ago, this suddenly popped up.
I can't think of anything I did. Sometimes restarting the mythtv backend fixes it, but no guarantees. But restarting the machine always fixes it.
Yes, I realize I'm running old version of the drivers and I should probably upgrade one day...but it was working great. Why cause problems when it's
working.
I'm running Fedora Core 3 on a nForce2 chipset setup with Jared's MythTv HowTo.
Using these ivtv rpms:
ivtv-kmdl-2.6.11-1.27_FC3-0.2.0-68_rc3j.rhfc3.at
ivtv-firmware-enc-2.04.024-4.at
ivtv- firmware-1.8a-4.at
ivtv-0.2.0-68_rc3j.rhfc3.at
ivtv- firmware-dec-2.02.023-4.at
Anyone got any ideas?
From the messages log when the issue pops up:
Mar 25 19:00:13 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:00:13 localhost kernel: ivtv: Failed api call 0x000000d2
with result 0xfffffff0
Mar 25 19:00:13 localhost kernel: saa7115: decoder disable output
Mar 25 19:00:13 localhost kernel: saa7115: decoder enable output
Mar 25 19:00:23 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:00:23 localhost kernel: ivtv: Failed api call 0x000000d2
with result 0xfffffff0
Mar 25 19:00:23 localhost kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Mar 25 19:00:24 localhost last message repeated 3 times
Mar 25 19:00:24 localhost kernel: saa7115: decoder set size
Mar 25 19:00:28 localhost kernel: ivtv: No Free Mailbox for cmd
0x000000c7 after 100 tries!
Mar 25 19:00:28 localhost kernel: ivtv: Mailbox[0] 0x000000d3 flags 0x00000003
Mar 25 19:00:28 localhost kernel: ivtv: Mailbox[1] 0x000000c9 flags 0x00000003
Mar 25 19:00:28 localhost kernel: ivtv: Mailbox[2] 0x000000d6 flags 0x00000003
Mar 25 19:00:28 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x000000c7!!!
Mar 25 19:00:32 localhost kernel: ivtv: No Free Mailbox for cmd
0x00000091 after 100 tries!
Mar 25 19:00:32 localhost kernel: ivtv: Mailbox[0] 0x000000b9 flags 0x00000003
Mar 25 19:00:32 localhost kernel: ivtv: Mailbox[1] 0x000000bb flags 0x00000003
Mar 25 19:00:32 localhost kernel: ivtv: Mailbox[2] 0x0000008f flags 0x00000003
Mar 25 19:00:32 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x00000091!!!
Mar 25 19:00:36 localhost kernel: ivtv: No Free Mailbox for cmd
0x000000b1 after 100 tries!
Mar 25 19:00:36 localhost kernel: ivtv: Mailbox[0] 0x00000099 flags 0x00000003
Mar 25 19:00:36 localhost kernel: ivtv: Mailbox[1] 0x00000095 flags 0x00000003
Mar 25 19:00:36 localhost kernel: ivtv: Mailbox[2] 0x00000097 flags 0x00000003
Mar 25 19:00:36 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x000000b1!!!
Mar 25 19:00:40 localhost kernel: ivtv: No Free Mailbox for cmd
0x0000009d after 100 tries!
Mar 25 19:00:40 localhost kernel: ivtv: Mailbox[0] 0x000000c5 flags 0x00000003
Mar 25 19:00:40 localhost kernel: ivtv: Mailbox[1] 0x000000bd flags 0x00000003
Mar 25 19:00:40 localhost kernel: ivtv: Mailbox[2] 0x0000009b flags 0x00000003
Mar 25 19:00:40 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x0000009d!!!
Mar 25 19:00:44 localhost kernel: ivtv: No Free Mailbox for cmd
0x000000d8 after 100 tries!
Mar 25 19:00:44 localhost kernel: ivtv: Mailbox[0] 0x0000009f flags 0x00000003
Mar 25 19:00:44 localhost kernel: ivtv: Mailbox[1] 0x000000a1 flags 0x00000003
Mar 25 19:00:44 localhost kernel: ivtv: Mailbox[2] 0x000000d0 flags 0x00000003
Mar 25 19:00:44 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x000000d8!!!
Mar 25 19:00:54 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:00:54 localhost kernel: ivtv: Failed api call 0x000000c8
with result 0xfffffff0
Mar 25 19:00:54 localhost kernel: ivtv: init error 21. Code -16
Mar 25 19:01:04 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:04 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:14 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:14 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:25 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:25 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:35 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:35 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:45 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:45 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:55 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:55 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:02:05 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:02:05 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:09:00 localhost kernel: ivtv: ENC: Error starting, retrying (1)...
Mar 25 19:09:10 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:09:10 localhost kernel: ivtv: Failed api call 0x00000081
with result 0xfffffff0
Mar 25 19:09:10 localhost kernel: ivtv: ENC: Error starting, retrying (0)...
dmesg output:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 12 (level, low) -> IRQ 12
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7478031
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3445 (type = 12)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 19 2005 04:40:44
ivtv: i2c attach [client=MSP3445G-B8,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 50
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 1995, itv = 0xf09db0a0
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 48432, rev = I110, serial# = 6142483
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[1],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[1],ok]
saa7115: status: (1E) 0x00, (1F) 0x40
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 19 2005 04:40:44
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a51450, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
spurious 8259A interrupt: IRQ7.
ivtv: ivtv_enc_thread: pid = 2086, itv = 0xf09ef540
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #1
ivtv: ==================== END INIT IVTV ====================
modprobe.conf:
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias tveeprom tveeprom-ivtv
alias msp3400 msp3400-ivtv
lspci -v output:
01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 12
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
01:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 4801
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Please let me know if anymore information is needed.
ivtv- firmware-1.8a-4.at
ivtv-0.2.0-68_rc3j.rhfc3.at
ivtv- firmware-dec-2.02.023-4.at
Anyone got any ideas?
From the messages log when the issue pops up:
Mar 25 19:00:13 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:00:13 localhost kernel: ivtv: Failed api call 0x000000d2
with result 0xfffffff0
Mar 25 19:00:13 localhost kernel: saa7115: decoder disable output
Mar 25 19:00:13 localhost kernel: saa7115: decoder enable output
Mar 25 19:00:23 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:00:23 localhost kernel: ivtv: Failed api call 0x000000d2
with result 0xfffffff0
Mar 25 19:00:23 localhost kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Mar 25 19:00:24 localhost last message repeated 3 times
Mar 25 19:00:24 localhost kernel: saa7115: decoder set size
Mar 25 19:00:28 localhost kernel: ivtv: No Free Mailbox for cmd
0x000000c7 after 100 tries!
Mar 25 19:00:28 localhost kernel: ivtv: Mailbox[0] 0x000000d3 flags 0x00000003
Mar 25 19:00:28 localhost kernel: ivtv: Mailbox[1] 0x000000c9 flags 0x00000003
Mar 25 19:00:28 localhost kernel: ivtv: Mailbox[2] 0x000000d6 flags 0x00000003
Mar 25 19:00:28 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x000000c7!!!
Mar 25 19:00:32 localhost kernel: ivtv: No Free Mailbox for cmd
0x00000091 after 100 tries!
Mar 25 19:00:32 localhost kernel: ivtv: Mailbox[0] 0x000000b9 flags 0x00000003
Mar 25 19:00:32 localhost kernel: ivtv: Mailbox[1] 0x000000bb flags 0x00000003
Mar 25 19:00:32 localhost kernel: ivtv: Mailbox[2] 0x0000008f flags 0x00000003
Mar 25 19:00:32 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x00000091!!!
Mar 25 19:00:36 localhost kernel: ivtv: No Free Mailbox for cmd
0x000000b1 after 100 tries!
Mar 25 19:00:36 localhost kernel: ivtv: Mailbox[0] 0x00000099 flags 0x00000003
Mar 25 19:00:36 localhost kernel: ivtv: Mailbox[1] 0x00000095 flags 0x00000003
Mar 25 19:00:36 localhost kernel: ivtv: Mailbox[2] 0x00000097 flags 0x00000003
Mar 25 19:00:36 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x000000b1!!!
Mar 25 19:00:40 localhost kernel: ivtv: No Free Mailbox for cmd
0x0000009d after 100 tries!
Mar 25 19:00:40 localhost kernel: ivtv: Mailbox[0] 0x000000c5 flags 0x00000003
Mar 25 19:00:40 localhost kernel: ivtv: Mailbox[1] 0x000000bd flags 0x00000003
Mar 25 19:00:40 localhost kernel: ivtv: Mailbox[2] 0x0000009b flags 0x00000003
Mar 25 19:00:40 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x0000009d!!!
Mar 25 19:00:44 localhost kernel: ivtv: No Free Mailbox for cmd
0x000000d8 after 100 tries!
Mar 25 19:00:44 localhost kernel: ivtv: Mailbox[0] 0x0000009f flags 0x00000003
Mar 25 19:00:44 localhost kernel: ivtv: Mailbox[1] 0x000000a1 flags 0x00000003
Mar 25 19:00:44 localhost kernel: ivtv: Mailbox[2] 0x000000d0 flags 0x00000003
Mar 25 19:00:44 localhost kernel: ivtv: Firmware UNRESPONSIVE when
trying cmd 0x000000d8!!!
Mar 25 19:00:54 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:00:54 localhost kernel: ivtv: Failed api call 0x000000c8
with result 0xfffffff0
Mar 25 19:00:54 localhost kernel: ivtv: init error 21. Code -16
Mar 25 19:01:04 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:04 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:14 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:14 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:25 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:25 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:35 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:35 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:45 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:45 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:01:55 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:01:55 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:02:05 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:02:05 localhost kernel: ivtv: Failed api call 0x000000b7
with result 0xfffffff0
Mar 25 19:09:00 localhost kernel: ivtv: ENC: Error starting, retrying (1)...
Mar 25 19:09:10 localhost kernel: ivtv: 1000 ms time out waiting for firmware
Mar 25 19:09:10 localhost kernel: ivtv: Failed api call 0x00000081
with result 0xfffffff0
Mar 25 19:09:10 localhost kernel: ivtv: ENC: Error starting, retrying (0)...
dmesg output:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 12 (level, low) -> IRQ 12
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7478031
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3445 (type = 12)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 19 2005 04:40:44
ivtv: i2c attach [client=MSP3445G-B8,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 50
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: ivtv_enc_thread: pid = 1995, itv = 0xf09db0a0
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
tveeprom: Hauppauge: model = 48432, rev = I110, serial# = 6142483
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[1],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[1],ok]
saa7115: status: (1E) 0x00, (1F) 0x40
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: May 19 2005 04:40:44
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a51450, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #1
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
spurious 8259A interrupt: IRQ7.
ivtv: ivtv_enc_thread: pid = 2086, itv = 0xf09ef540
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #1
ivtv: ==================== END INIT IVTV ====================
modprobe.conf:
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias tveeprom tveeprom-ivtv
alias msp3400 msp3400-ivtv
lspci -v output:
01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 12
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
01:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 4801
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dc000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Please let me know if anymore information is needed.
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
