Hello, I can't look status right now because i am not at that computer. It is on another location! I know from dmesg that my tuner is suporting SECAL L/L
[4302412.744000] tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) I know that in Russia have standard SECAM D/K Does my card support that standatd to or not! I will look at status tomorow and report if i solved something! Thanks Hans Verkuil wrote: > Have you tried the ivtv module option ivtv_std=3? That selects SECAM. > > However, if this does not work then I recommend upgrading to 2.6.16 & > ivtv-0.6.x as in that version you can select the precise SECAM standard > (BG, DK, L). Depending on where you live that might be needed. > > Check with ivtvctl --log-status to see what standard is detected. In > case of problems please show the output of this command. It is very > useful to solve problems like this. > > Hans > > On Tuesday 18 April 2006 11:20, Gregor Fuis wrote: > >> Hello, >> >> I upgraded to 0.4.4. >> >> If i change input video standard to SECAM i don't get anything good. >> It looks like frequency is not right. If source is set to PAL i get >> the picture but with snow, as the frequency wasn't right. >> >> But with 0.3.9 driver it was clear picture on PAL but with red color >> in it, in SECAM i didn't even get picture! >> >> Gregor Fuis wrote: >> >>> Hello, >>> >>> I can't get serial numbers because i am not in the same place now. >>> But i think that it writes on a tuner PAL/Secam. So it would have >>> to work! Maybe i just have to change some settingsto the card? >>> >>> Best Regards, >>> Gregor Fuis >>> >>> Richard Hendershot wrote: >>> >>>> The current utility from ivtv 0.6 allows setting hue and >>>> saturation (ivtvctl -Y reads the values) but there's no RGB that I >>>> can find. >>>> >>>> http://en.wikipedia.org/wiki/SECAM >>>> "SÉCAM differs from the other color systems by the way the R-Y and >>>> B-Y signals are carried. >>>> First, SÉCAM uses frequency modulation >>>> <http://en.wikipedia.org/wiki/Frequency_modulation> to encode >>>> chrominance <http://en.wikipedia.org/wiki/Chrominance> information >>>> on the sub carrier. >>>> Second, instead of transmitting the red and blue information >>>> together, it only sends one of them at a time, and uses the >>>> information about the other color from the preceding line...." >>>> >>>> You may be able to use ivtvctl to approximate B/W. Otherwise you >>>> may be able to use a converter >>>> (http://www.vtx.co.uk/video/tvconverters.htm#tsp100) >>>> <http://www.vtx.co.uk/video/tvconverters.htm#tsp100%29> >>>> >>>> I'd upgrade, were I you, in any case. btw- I'm american and use >>>> NTSC so have no real knowledge of SECAM. But I have internet, and >>>> a little research was interesting.... so.... YMMV ;) >>>> >>>> Which model? There is a SECAM version of the 150 >>>> >>>> *Model numbers* >>>> *model 01045:* WinTV-PVR-150 with Hauppauge remote control, IR >>>> Blaster and NTSC tuner >>>> *model 01046:* WinTV-PVR-150 with Hauppauge remote control, IR >>>> Blaster and PAL/SECAM tuner >>>> >>>> On Mon, 2006-04-17 at 16:26 +0200, Gregor Fuis wrote: >>>> >>>>> Hello, >>>>> >>>>> When i was in Gemany i bought PVR-150 card and it worked very >>>>> well. It is instaled on ubuntu distribution with 2.6.12 kernel >>>>> and ivtv 3.9.0 drivers. Now i am in russia and can't get to >>>>> internet very easy. >>>>> >>>>> Here in russia they have secam standard and now all my channels >>>>> are in red color. Does somebody know if more recent version of >>>>> ivtv could solve the problem. I didn't set anything diferent than >>>>> in europe for PAL so maybe i am doing something wrong. >>>>> >>>>> I am looking picture with vlc media player. >>>>> >>>>> Please i just need info if somebody know how could i solve the >>>>> problem with this red color all over my channels! >>>>> >>>>> Thanks >>>>> >>>>> Best Regards, >>>>> Gregor Fuis >>>>> >>>>> _______________________________________________ >>>>> ivtv-users mailing list >>>>> [email protected] <mailto:[email protected]> >>>>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >>>>> >>>> -- >>>> Richard Hendershot <[EMAIL PROTECTED] >>>> <mailto:[EMAIL PROTECTED]>> >>>> >>>> ------------------------------------------------------------------ >>>> ------ >>>> >>>> _______________________________________________ >>>> ivtv-users mailing list >>>> [email protected] >>>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >>>> >>> _______________________________________________ >>> ivtv-users mailing list >>> [email protected] >>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >>> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
