Gidday all. I've got a problem - I've added a second hauppauge PVR-150 to an existing mythtv backend machine.
Now one tuner works fine, the other tuner returns only static, and appears to be loading things heavily when its in use. I changed from ivtv 0.4.0 to 0.4.4 and that made no difference. The original card was a PVR-150 MCE variant, and the new one is a PVR-150 retail version. Both cards worked perfectly previously. I have used a splitter to provide both cards with a signal from the aerial - I have tried swapping the leads so I know its not a simple matter of cabling. Does anyone have any ideas? lspci says 0000:00:0a.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 0000:00:0c.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Here's the relevant dmesg lines.... ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.4 (tagged release) loading ivtv: Linux version: 2.6.14.2 PENTIUMIII gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177 ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] tveeprom 1-0050: Hauppauge model 26039, rev C1A5, serial# 7930897 tveeprom 1-0050: tuner model is unknown (idx 105, type 0) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25842 (idx 36) tveeprom 1-0050: decoder processor is CX25842 (idx 29) tveeprom 1-0050: has no radio, has IR remote cx25840 1-0044: ivtv driver cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 0 (Temic PAL (4002 FH5)) ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 185 ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] cx25840 2-0044: ivtv driver cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] tveeprom 2-0050: Hauppauge model 26559, rev B260, serial# 8741972 tveeprom 2-0050: tuner model is LG S001D MK3 (idx 60, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv1: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== -- Criggie _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
