Hi, I've just upgraded my kernel to the lastes gentoo-source, after rebuilding ivtv (0.4.2) my tuner is not detected properly:
Apr 29 12:10:24 totara ivtv: ==================== START INIT IVTV ==================== Apr 29 12:10:24 totara ivtv: version 0.4.2 (tagged release) loading Apr 29 12:10:24 totara ivtv: Linux version: 2.6.16-gentoo-r3 K7 gcc-3.4 Apr 29 12:10:24 totara ivtv: In case of problems please include the debug info between Apr 29 12:10:24 totara ivtv: the START INIT IVTV and END INIT IVTV lines, along with Apr 29 12:10:24 totara ivtv: any module options, when mailing the ivtv-users mailinglist. Apr 29 12:10:24 totara ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) Apr 29 12:10:24 totara ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 20 Apr 29 12:10:24 totara ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] Apr 29 12:10:24 totara tveeprom 0-0050: Hauppauge model 26559, rev B260, serial# 8741061 Apr 29 12:10:24 totara tveeprom 0-0050: tuner model is LG S001D MK3 (idx 60, type 38) Apr 29 12:10:24 totara tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Apr 29 12:10:24 totara tveeprom 0-0050: audio processor is CX25843 (idx 37) Apr 29 12:10:24 totara tveeprom 0-0050: decoder processor is CX25843 (idx 30) Apr 29 12:10:24 totara tveeprom 0-0050: has radio, has no IR remote Apr 29 12:10:24 totara tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) Apr 29 12:10:24 totara ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] Apr 29 12:10:24 totara cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Apr 29 12:10:27 totara cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes) Apr 29 12:10:27 totara ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] Apr 29 12:10:27 totara wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) Apr 29 12:10:27 totara ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] Apr 29 12:10:27 totara tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) Apr 29 12:10:27 totara ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] Apr 29 12:10:28 totara ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Apr 29 12:10:28 totara ivtv0: Encoder revision: 0x02050032 Apr 29 12:10:28 totara ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) Apr 29 12:10:28 totara ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) Apr 29 12:10:28 totara ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) Apr 29 12:10:28 totara ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) Apr 29 12:10:28 totara ivtv0: Create encoder radio stream Apr 29 12:10:28 totara cx25840 0-0044: 0x0000 is not a valid video input! Apr 29 12:10:28 totara tuner 0-0061: tuner type not set Apr 29 12:10:28 totara tuner 0-0061: tuner type not set Apr 29 12:10:28 totara ivtv0: Initialized WinTV PVR 150, card #0 Apr 29 12:10:28 totara ivtv: ==================== END INIT IVTV ==================== I've tried manually specifiy the tuner as an ivtv option (first 38, as it was detected this way previosly, then, anything that had _FM1216ME_MK3 in the name). Unfortunately - to no avail. I suspect that the gentoo ivtv driver is too old to work with 2.6.16 kernels, can anyone confirm that? regards pshemko _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
