Hello, Recently I bought a new pc with asus p5p800se board P4 630 processor and pvr-500mce tv card. First, I tried to get the tv-card working with suse 10.0 with the rpm's from suse and tips from ivtvdriver.org for suse. The driver seems to be loaded, but it does not work. Since there were a number of other problems, e.g. (the graphics card?) sometimes blocked the pc completely.
I now tried installing the suse 9.3 32-bit version. I hoped that the stability for 32bit would be better and suse 10.0 would automatically install for 64 bit (x86_64). For suse 9.3 I downloaded ivtv-0.4.4 (also tried 0.4.3) and generally followed the instructions from ivtvdriver.org. Only the firmware I installed in /lib/firmware as HcwMakoA.ROM and ivtv-fw-enc.bin because this was recognized when loading the ivtv-driver. This is different from the instructions on the site. >From the log it appears that (for suse9.3 - ivtv-0.4.4) the card is not detected. For suse 10.0 the card was recognized. I included both logs from dmesg for additional info. Can anyone give me a clue how to get the card working? Best regards, Mart ivtv: module not supported by Novell, setting U taint flag. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (c) loading ivtv: Linux version: 2.6.11.4-21.11-smp SMP 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/e807 ivtv: Defaulting to WinTV PVR 150 card ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv: Prefix your subject line with [UNKNOWN CARD]. ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 217 ivtv: XXX PCI device: 0x2570 vendor: 0x8086 i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: ivtv i2c driver #0 passed test. tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: module not supported by Novell, setting U taint flag. cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840: starting probe for adapter SMBus I801 adapter at 0400 (0x0) cx25840: detecting client on address 0x88 cx25840: writing init values i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C set default write failed, length 4, ret -38 i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C set default write failed, length 26, ret -38 >>>shortened here i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 3, ret -38 i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 3, ret -38 cx25840: Sequence tag: 'FW DL Start' i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 3, ret -38 i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 4, ret -38 i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 3, ret -38 i2c_adapter i2c-0: I2C level transfers not supported cx25840: Failed to upload FW chunk, size 1022, uploaded 0 bytes. cx25840: Sequence tag: 'FW DL Stop' i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 3, ret -38 i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C sequence write failed, length 3, ret -38 cx25840: Failed to load any FW image file i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 18, ret -38 cx25840: Status: cx25 0 (DEVICE_ID) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 10, ret -38 cx25840: Status: 0x00 (REV_ID, Revision ID.) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 10, ret -38 cx25840: Status: 'Mono' (Detected audio mode) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 10, ret -38 cx25840: Status: 'Not defined' (Detected audio standard) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: Video signal not present i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 6, ret -38 cx25840: Status: 0x00 (MICROCNTL_VIDEO_FORMAT, Detected video format) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: Not Ready Filter auto tuning status i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 7, ret -38 cx25840: Status: 0x00 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 4, ret -38 cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 6, ret -38 cx25840: Status: 0x01 (AFD_FMT_STAT, Currently detected Format) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (FIELD, Field status (even/odd)) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO Overflow) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO Underflow) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (VSYNC, Vertical sync) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (HLOCK, Horizontal lock status) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (VLOCK, Vertical lock status) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (AGC_LOCK, VGA lock status) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) i2c_adapter i2c-0: I2C level transfers not supported cx25840: I2C write failed, length 3, ret -38 cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: Sequence tag: 'Boot.' cx25840: Sequence tag: 'FW DL Start' subfs 0.9 cx25840: Sequence tag: 'FW DL Stop' cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[1],ok] cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'Not defined' (Detected audio standard) cx25840: Status: Video signal not present cx25840: Status: 0x01 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x17 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x01 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x00 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x01 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x00 (VLOCK, Vertical lock status) cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) wm8775: module not supported by Novell, setting U taint flag. wm8775: Ignoring new-style parameters in presence of obsolete ones wm8775: Init wm8775: starting probe for adapter SMBus I801 adapter at 0400 (0x0) wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) wm8775: detecting client on address 0x36 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. wm8775: Updating register 2 (R11), config: 1622 active: 1621. wm8775: Updating register 3 (R12), config: 1802 active: 1902. wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. wm8775: Skipping register 7 (R16), config: 207b active: 207b. wm8775: Skipping register 8 (R17), config: 2200 active: 2200. wm8775: Updating register 9 (R18), config: 2432 active: 2482. wm8775: Updating register 10 (R19), config: 2600 active: 2601. wm8775: Skipping register 11 (R20), config: 2826 active: 2826. wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. ivtv: i2c attach [client=wm8775[0],ok] ivtv: requesting firmware bootsplash: status on console 0 changed to on Firmware image too large 'ivtv-fw-enc.bin' ivtv: firmware loaded ivtv: failed loading encoder firmware ivtv: Error loading firmware -3! ivtv: Error -3 initializing firmware. ivtv: Error -12 on initialization ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:03:08.0 failed with error -12 ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/e817 ivtv: Defaulting to WinTV PVR 150 card ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv ivtv: Prefix your subject line with [UNKNOWN CARD]. ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 21 (level, low) -> IRQ 225 ivtv: XXX PCI device: 0x2570 vendor: 0x8086 i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: ivtv i2c driver #0 passed test. tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: Sequence tag: 'Boot.' cx25840: Sequence tag: 'FW DL Start' cx25840: Sequence tag: 'FW DL Stop' cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[2],ok] cx25840: Status: 0x03 (REV_ID, Revision ID.) cx25840: Status: 'Mono' (Detected audio mode) cx25840: Status: 'Not defined' (Detected audio standard) cx25840: Status: Video signal not present cx25840: Status: 0x01 (MICROCNTL_VIDEO_FORMAT, Detected video format) cx25840: Status: Ready Filter auto tuning status cx25840: Status: 0x17 (TUNE_OUT, The tuning code selected by the auto-tune algorithm.) cx25840: Status: 0x00 (MV_CDAT, Macrovision Copy Control Bits as described in the MacroVision) cx25840: Status: 0x00 (MV_PSP, Macrovision Pseudo Sync Pulses detected) cx25840: Status: 0x00 (MV_CS, Macrovision Color Striping Detected) cx25840: Status: 0x00 (MV_T3CS, A 1 indicates the presence of type 3 of the color stripe process. A) cx25840: Status: 0x00 (MV_TYPE2_PAIR, Macrovision Type 2 pair detected) cx25840: Status: 0x01 (AFD_FMT_STAT, Currently detected Format) cx25840: Status: 0x00 (FIELD, Field status (even/odd)) cx25840: Status: 0x00 (SRC_FIFO_OFLOW, Sample Rate Converter FIFO Overflow) cx25840: Status: 0x00 (SRC_FIFO_UFLOW, Sample Rate Converter FIFO Underflow) cx25840: Status: 0x01 (VSYNC, Vertical sync) cx25840: Status: 0x01 (HLOCK, Horizontal lock status) cx25840: Status: 0x00 (SRC_LOCK, Sample Rate Converter lock Status) cx25840: Status: 0x00 (VLOCK, Vertical lock status) cx25840: Status: 0x00 (CSC_LOCK, Color Subcarrier lock status) cx25840: Status: 0x01 (AGC_LOCK, VGA lock status) cx25840: Status: 0x00 (VPRES, Active-high video present. Indication of the presence of a) cx25840: Status: 0x00 (SPECIAL_PLAY_N, Active-low special play mode (fast forward, rewind, pulse, or slow) wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) wm8775: detecting client on address 0x36 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Offset reset.reg[0]=2e00 wm8775: Offset reset.reg[1]=0e00 wm8775: Offset reset.reg[2]=1600 wm8775: Offset reset.reg[3]=1800 wm8775: Offset reset.reg[4]=1a00 wm8775: Offset reset.reg[5]=1c00 wm8775: Offset reset.reg[6]=1e00 wm8775: Offset reset.reg[7]=2000 wm8775: Offset reset.reg[8]=2200 wm8775: Offset reset.reg[9]=2400 wm8775: Offset reset.reg[10]=2600 wm8775: Offset reset.reg[11]=2800 wm8775: Offset reset.reg[12]=2a00 wm8775: Updating reg[R23]=2e01 added Reset with default 1 wm8775: Updating reg[R7]=0e00 added TOD with default 0 wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 wm8775: Updating reg[R11]=1620 added ADCWL with default 2 wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 wm8775: Updating reg[R12]=1800 added ADCMS with default 0 wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 wm8775: Updating reg[R13]=1a00 added AINPD with default 0 wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 wm8775: Updating reg[R13]=1a00 added PWDN with default 0 wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 wm8775: Updating reg[R14]=1ccf added LAG with default 207 wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 wm8775: Updating reg[R15]=1ecf added RAG with default 207 wm8775: Updating reg[R16]=2000 added LCSEL with default 0 wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 wm8775: Updating reg[R16]=207b added LCT with default 11 wm8775: Updating reg[R17]=2200 added LCEN with default 0 wm8775: Updating reg[R17]=2200 added ALCZC with default 0 wm8775: Updating reg[R17]=2200 added HLD with default 0 wm8775: Updating reg[R18]=2430 added DCY with default 3 wm8775: Updating reg[R18]=2432 added ATK with default 2 wm8775: Updating reg[R19]=2600 added NGTH with default 0 wm8775: Updating reg[R19]=2600 added NGAT with default 0 wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 wm8775: Updating reg[R21]=2a01 added AMX with default 1 wm8775: Final reset.reg[0]=2e01 wm8775: Final reset.reg[1]=0e00 wm8775: Final reset.reg[2]=1622 wm8775: Final reset.reg[3]=1802 wm8775: Final reset.reg[4]=1a00 wm8775: Final reset.reg[5]=1ccf wm8775: Final reset.reg[6]=1ecf wm8775: Final reset.reg[7]=207b wm8775: Final reset.reg[8]=2200 wm8775: Final reset.reg[9]=2432 wm8775: Final reset.reg[10]=2600 wm8775: Final reset.reg[11]=2826 wm8775: Final reset.reg[12]=2a01 wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. wm8775: Updating register 2 (R11), config: 1622 active: 1621. wm8775: Updating register 3 (R12), config: 1802 active: 1902. wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. wm8775: Skipping register 7 (R16), config: 207b active: 207b. wm8775: Skipping register 8 (R17), config: 2200 active: 2200. wm8775: Updating register 9 (R18), config: 2432 active: 2482. wm8775: Updating register 10 (R19), config: 2600 active: 2601. wm8775: Skipping register 11 (R20), config: 2826 active: 2826. wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. ivtv: i2c attach [client=wm8775[1],ok] ivtv: requesting firmware Firmware image too large 'ivtv-fw-enc.bin' ivtv: firmware loaded ivtv: failed loading encoder firmware ivtv: Error loading firmware -3! ivtv: Error -3 initializing firmware. ivtv: Error -12 on initialization ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:03:09.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== and from suse 10.0 Apr 30 11:53:29 igor kernel: ivtv: module not supported by Novell, setting U taint flag. Apr 30 11:53:29 igor kernel: ivtv: ==================== START INIT IVTV ==================== Apr 30 11:53:29 igor kernel: ivtv: version 0.3.7 (c) loading Apr 30 11:53:29 igor kernel: ivtv: Linux version: 2.6.13-15.8-smp SMP gcc-4.0 Apr 30 11:53:29 igor kernel: ivtv: In case of problems please include the debug info Apr 30 11:53:29 igor kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Apr 30 11:53:29 igor kernel: ivtv: mailing the ivtv-devel mailinglist. Apr 30 11:53:29 igor kernel: ivtv: Autodetected WinTV PVR 150 card Apr 30 11:53:29 igor kernel: ivtv: Found an iTVC16 based chip Apr 30 11:53:29 igor kernel: i2c-algo-bit.o: (0) scl=1, sda=1 Apr 30 11:53:29 igor kernel: i2c-algo-bit.o: (1) scl=1, sda=0 Apr 30 11:53:29 igor kernel: i2c-algo-bit.o: (2) scl=1, sda=1 Apr 30 11:53:29 igor kernel: i2c-algo-bit.o: (3) scl=0, sda=1 Apr 30 11:53:29 igor kernel: i2c-algo-bit.o: (4) scl=1, sda=1 Apr 30 11:53:29 igor kernel: i2c-algo-bit.o: ivtv i2c driver #0 passed test. Apr 30 11:53:29 igor kernel: ivtv: i2c attach [client=tveeprom,ok] Apr 30 11:53:29 igor kernel: tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8223440 Apr 30 11:53:29 igor kernel: tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) Apr 30 11:53:29 igor kernel: tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Apr 30 11:53:29 igor kernel: tveeprom: audio_processor = MSP3410D (type = 5) Apr 30 11:53:29 igor kernel: ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x3c825de8 Apr 30 11:53:29 igor kernel: ivtv: PAL tuner detected Apr 30 11:53:29 igor kernel: ivtv: Radio detected Apr 30 11:53:29 igor kernel: : chip found @ 0xc0 (ivtv i2c driver #0) Apr 30 11:53:29 igor kernel: : TEA5767 detected. Apr 30 11:53:29 igor kernel: ivtv: i2c attach [client=(tuner unset),ok] Apr 30 11:53:29 igor kernel: tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) Apr 30 11:53:29 igor kernel: : chip found @ 0xc2 (ivtv i2c driver #0) Apr 30 11:53:29 igor kernel: ivtv: i2c attach [client=(tuner unset),ok] Apr 30 11:53:29 igor kernel: cx25840: module not supported by Novell, setting U taint flag. Apr 30 11:53:29 igor kernel: cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005) Apr 30 11:53:29 igor kernel: cx25840: detecting cx25840 client on address 0x88 Apr 30 11:53:29 igor kernel: cx25840: cx25843-23 found. Initializing... Apr 30 11:53:29 igor kernel: cx25840: requesting HcwMakoA.ROM from hotplug Apr 30 11:53:30 igor kernel: bootsplash: status on console 0 changed to on Apr 30 11:53:30 igor kernel: cx25840: firmware loaded Apr 30 11:53:30 igor kernel: ivtv: i2c attach [client=cx25840[50],ok] Apr 30 11:53:30 igor kernel: wm8775: module not supported by Novell, setting U taint flag. Apr 30 11:53:30 igor kernel: ivtv: i2c attach [client=wm8775[50],ok] Apr 30 11:53:30 igor kernel: usbcore: registered new driver hiddev Apr 30 11:53:30 igor kernel: tda9885/6/7: chip found @ 0x86 Apr 30 11:53:30 igor kernel: ivtv: i2c attach [client=tda9887,ok] Apr 30 11:53:30 igor kernel: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1 Apr 30 11:53:30 igor kernel: input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 Apr 30 11:53:30 igor kernel: usbcore: registered new driver usbhid Apr 30 11:53:30 igor kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver Apr 30 11:53:30 igor kernel: ivtv: requesting ivtv-fw-enc.bin from hotplug Apr 30 11:53:30 igor kernel: ivtv: firmware loaded Apr 30 11:53:30 igor kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Apr 30 11:53:30 igor kernel: ivtv: Encoder revision: 0x02050032 Apr 30 11:53:30 igor kernel: ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! Apr 30 11:53:30 igor kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Apr 30 11:53:30 igor kernel: ivtv: Registered v4l2 device for encoder MPEG minor 0 Apr 30 11:53:30 igor kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Apr 30 11:53:30 igor kernel: ivtv: Registered v4l2 device for encoder YUV minor 32 Apr 30 11:53:30 igor kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Apr 30 11:53:30 igor kernel: ivtv: Registered v4l2 device for encoder VBI minor 224 Apr 30 11:53:30 igor kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) Apr 30 11:53:30 igor kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 24 Apr 30 11:53:30 igor kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Apr 30 11:53:30 igor kernel: ivtv: Registered v4l2 device for encoder radio minor 64 Apr 30 11:53:30 igor kernel: ivtv: Create encoder radio stream Apr 30 11:53:30 igor kernel: ivtv: Setting Tuner 56 Apr 30 11:53:30 igor kernel: tuner 1-0060: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) Apr 30 11:53:30 igor kernel: cx25840: decoder set norm PAL Apr 30 11:53:30 igor kernel: cx25840: decoder set input (6) Apr 30 11:53:30 igor kernel: cx25840: now setting Tuner input Apr 30 11:53:30 igor kernel: cx25840: set audio input (0) Apr 30 11:53:30 igor kernel: ivtv: Switching standard to PAL. Apr 30 11:53:30 igor kernel: cx25840: decoder set norm PAL Apr 30 11:53:30 igor kernel: ivtv: ivtv_enc_thread: pid = 5279, itv = 0xffffffff88910c20 Apr 30 11:53:30 igor kernel: ivtv: ivtv_enc_vbi_thread: pid = 5280, itv = 0xffffffff88910c20 Apr 30 11:53:30 igor kernel: cx25840: decoder disable output Apr 30 11:53:30 igor kernel: cx25840: decoder enable output Apr 30 11:53:30 igor kernel: cx25840: decoder set norm PAL Apr 30 11:53:30 igor kernel: cx25840: decoder set input (6) Apr 30 11:53:30 igor kernel: cx25840: now setting Tuner input Apr 30 11:53:30 igor kernel: cx25840: set audio input (0) Apr 30 11:53:30 igor kernel: ivtv: Initialized WinTV PVR 150, card #0 Apr 30 11:53:30 igor kernel: ivtv: Autodetected WinTV PVR 150 card Apr 30 11:53:30 igor kernel: ivtv: Found an iTVC16 based chip Apr 30 11:53:30 igor mDNSResponder (Engineering Build) (Sep 9 2005 17:22:16) [5727]: starting >> shortened here Apr 30 11:53:34 igor kernel: cx25840: decoder set norm PAL Apr 30 11:53:34 igor kernel: cx25840: decoder set input (6) Apr 30 11:53:34 igor kernel: cx25840: now setting Tuner input Apr 30 11:53:34 igor kernel: cx25840: set audio input (0) Apr 30 11:53:34 igor kernel: ivtv: ivtv_enc_thread: pid = 5675, itv = 0xffffffff88934d48 Apr 30 11:53:34 igor kernel: ivtv: ivtv_enc_vbi_thread: pid = 5676, itv = 0xffffffff88934d48 Apr 30 11:53:34 igor kernel: ivtv: Initialized WinTV PVR 150, card #1 Apr 30 11:53:34 igor kernel: ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
