Here goes all the relevant information I can find....
I have selected channel 25 (the card detects the signal).
Thank you for helping...
The dmesg output:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.2 (tagged release) loading
ivtv: Linux version: 2.6.16-gentoo-r4 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) ->
IRQ 233
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 3-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tveeprom 3-0050: Hauppauge model 26582, rev C699, serial# 8900690
tveeprom 3-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has no radio, has no IR remote
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 3-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
zeus ~ # ivtvctl --log-status
ioctl VIDIOC_LOG_STATUS ok
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 3-0050: Hauppauge model 26582, rev C699, serial# 8900690
tveeprom 3-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has no radio, has no IR remote
cx25840 3-0044: Video signal: present
cx25840 3-0044: Detected format: NTSC-M
cx25840 3-0044: Detected audio mode: forced mode
cx25840 3-0044: Detected audio standard: forced audio standard
cx25840 3-0044: Audio muted: no
cx25840 3-0044: Audio microcontroller: running
cx25840 3-0044: Configured audio standard: BTSC
cx25840 3-0044: Configured audio mode: undefined
cx25840 3-0044: Specified standard: PAL-M
cx25840 3-0044: Specified video input: Composite 7
cx25840 3-0044: Specified audio input: Tuner (In8)
cx25840 3-0044: Specified audioclock freq: 48000 Hz
cx25840 3-0044: Preferred audio mode: stereo
cx25840 3-0044: Selected 65 MHz format: system DK
cx25840 3-0044: Selected 45 MHz format: chroma
wm8775 3-001b: Input: 2
tuner 3-0061: Tuner mode: analog TV
tuner 3-0061: Frequency: 229.25 MHz
tuner 3-0061: Standard: 0x00000100
ivtv0: ================== END STATUS CARD #0 ==================
zeus #ivtvctl -a
ioctl IVTV_IOC_G_CODEC ok
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 9600000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 8
dnr_type : 0
framerate : 0
framespergop: 15
gop_closure : 1
pulldown : 0
stream_type : 14
ioctl VIDIOC_G_FMT ok
Type : Video Capture
Width : 720
Height : 480
ioctl VIDIOC_QUERYCAP ok
Driver name : ivtv
Card type : Hauppauge WinTV PVR-150
Bus info : 0000:01:06.0
Driver version: 1538
Capabilities : 0x01030011
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Tuner 1
Type : 0x00000001
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000000100 ( PAL )
Status : 0
Input : 1
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 4
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
ioctl VIDIOC_G_INPUT ok
Video input = 0
ioctl: VIDIOC_ENUMOUTPUT
ioctl VIDIOC_G_OUTPUT failed: Invalid argument
ioctl: VIDIOC_ENUMAUDIO
Input : 0
Name : Tuner 1
Input : 1
Name : Line In 1
Input : 2
Name : Line In 2
ioctl VIDIOC_G_AUDIO ok
Audio input = 0: Tuner 1
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 3668
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x000000000000000F
Name : PAL-BGH
Frame period: 1/25
Frame lines : 625
index : 1
ID : 0x00000000000000E0
Name : PAL-DK
Frame period: 1/25
Frame lines : 625
index : 2
ID : 0x0000000000000010
Name : PAL-I
Frame period: 1/25
Frame lines : 625
index : 3
ID : 0x0000000000000100
Name : PAL-M
Frame period: 1001/30000
Frame lines : 525
index : 4
ID : 0x0000000000000200
Name : PAL-N
Frame period: 1/25
Frame lines : 625
index : 5
ID : 0x0000000000000400
Name : PAL-Nc
Frame period: 1/25
Frame lines : 625
index : 6
ID : 0x00000000000D0000
Name : SECAM-BGH
Frame period: 1/25
Frame lines : 625
index : 7
ID : 0x0000000000320000
Name : SECAM-DK
Frame period: 1/25
Frame lines : 625
index : 8
ID : 0x0000000000400000
Name : SECAM-L
Frame period: 1/25
Frame lines : 625
index : 9
ID : 0x0000000000800000
Name : SECAM-L'
Frame period: 1/25
Frame lines : 625
index : 10
ID : 0x0000000000001000
Name : NTSC-M
Frame period: 1001/30000
Frame lines : 525
index : 11
ID : 0x0000000000002000
Name : NTSC-J
Frame period: 1001/30000
Frame lines : 525
index : 12
ID : 0x0000000000008000
Name : NTSC-K
Frame period: 1001/30000
Frame lines : 525
ioctl VIDIOC_G_STD ok
Video standard = 0x00000100
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 60928
Balance = 32768
Treble = 32768
Mute = 0ss = 32768
-----Mensagem original-----
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Hans Verkuil
Enviada em: Monday, May 08, 2006 5:40 PM
Para: User discussion about IVTV
Assunto: Re: [ivtv-users] PAL-M reception with Hauppauge PVR-150
On Monday 08 May 2006 03:29, Andre Conter Ribeiro wrote:
> I have the NTSC version of the Hauppauge receiver, but I was told by
> Hauppauge support that the " pal " version of the card was not for
> pal-m, but for other PAL formats that are used in Africa and Europe.
That's correct.
> I have configured the card, I am running IVTV 0.6.2 but all I can get
> is Bad-quality black and white. I have changed the card to use PAL
> format by using
>
> Modprobe ivtv Ivtv_std=2 (in older versions of IVTV)
>
> ivctl -u 0x0000fff (more zeroes)
>
> and modprobe ivtv pal=m (for the 0.6.x branch).
This is the correct module option for 0.6.2.
> But after I do this, I get a "vertical sync" kind of problem (the
> image gets garbled).
>
> What are the correct procedures to get the Hauppauge set to PAL-M?
The problem is that it has never been tested with PAL-M, so you are the
first.
Can you give me the output of ivtvctl --log-status (after first
selecting a valid channel)? That should give me an indication of what
the status is of various chips and we'll take it from there.
Also please give the IVTV INIT output from dmesg so I know what system
and card you have.
Thanks,
Hans
_______________________________________________
ivtv-users mailing list
[email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
