Hy,
got the following Hardware:
- Asus K8V (most recent BIOS)
- AMD Sempron 2600+ (S754) (Palermo)
- 2x512MB DDR33 RAM
- Haupaug PVR150
and this Hardware:
- Gentoo Linux ~x86
- Kernel:
Linux theather 2.6.16-gentoo-r7 #3 PREEMPT Sun May 14 23:25:20 CEST 2006 i686
AMD Sempron(tm) Processor 2800+ GNU/Linux
- IVTV: Version 0.4.2 from Gentoo-Package
I installed ivtv via emerge. Everything works except the audio.
My "ivtvctl -a" gives:
====
ioctl IVTV_IOC_G_CODEC ok
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 9600000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 8
dnr_type : 0
framerate : 0
framespergop: 12
gop_closure : 1
pulldown : 0
stream_type : 14
ioctl VIDIOC_G_FMT ok
Type : Video Capture
Width : 720
Height : 576
ioctl VIDIOC_QUERYCAP ok
Driver name : ivtv
Card type : WinTV PVR 150
Bus info : 0000:00:0d.0
Driver version: 1026
Capabilities : 0x01030051
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Tuner
Type : 0x00000001
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000000000FF ( PAL )
Status : 0
Input : 1
Name : Composite 0
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : S-Video 0
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
Input : 4
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000003
Tuner : 0x00000000
Standard: 0x00000000007F7FFF ( PAL NTSC SECAM )
Status : 0
ioctl VIDIOC_G_INPUT ok
Video input = 3
ioctl: VIDIOC_ENUMOUTPUT
ioctl VIDIOC_G_OUTPUT failed: Invalid argument
ioctl: VIDIOC_ENUMAUDIO
Input : 0
Name : Tuner Audio In
Input : 1
Name : Audio Line 1
Input : 2
Name : Audio Line 2
Input : 3
Name : Audio Line 3
Input : 4
Name : Audio Line 4
ioctl VIDIOC_G_AUDIO ok
Audio input = 2: Audio Line 2
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 6400
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x0000000000003000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
index : 1
ID : 0x00000000000000FF
Name : PAL
Frame period: 1/25
Frame lines : 625
index : 2
ID : 0x00000000007F0000
Name : SECAM
Frame period: 1/25
Frame lines : 625
ioctl VIDIOC_G_STD ok
Video standard = 0x000000ff
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 60928
Mute = 1
====
The Problem seems the "Mute = 1" at the end. In the wiki I read that this is
perhaps a firmware-error. So I tried different ones:
1. The recommended from the wiki
2. The most recent from Haupauge
3. This: http://hauppauge.lightpath.net/software/pvr150/pvr150_inf.zip
All of the gave the same error, I was never able to change the mute-status.
A "ivtvctl --set-ctrl=mute=0" didnt show any effect.
Who can help me? Without a sound, a TV-Device is useless :D
Thanks a lot
Dominik
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
