On 5/24/06, Jonathan Black <[EMAIL PROTECTED]> wrote:
Adam,
You need to upgrade your firmware for your Hauppauge card. It makes a
big difference. For instructions read:
http://www.ivtvdriver.org/pipermail/ivtv-users/2006-May/002723.html
Jonathan
> I have installed a Hauppauge 500 card. The 1st tuner is working
> great. The 2nd tuner displays a good picture, but the sound is just
> static. To verify the problem is not with my MythTV config, I tested
> by issuing the command "cat /dev/video1 > /tmp/test.mpg". I haven't
> found any errors in my logs. Any ideas?
>
> I'm currently running:
> Ubuntu
> Kernel 2.6.10-6-386
> ivtv 0.4.5
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.5 (tagged release) loading
> ivtv: Linux version: 2.6.10-6-386 preempt 386 gcc-3.3
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tveeprom: Second (radio) tuner idx 101
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 23552, rev = E587, serial# = 8825862
> tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 68)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> ts: Compaq touchscreen protocol output
> ivtv0: This is the first unit of a PVR500
> tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
> TEA5767 detected.
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
> tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
> type set to 62 (Philips TEA5767HN FM Radio)
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> cx25840 0-0044: ivtv driver
> cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 0-001b: ivtv driver
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
> (2048KB total)
> ivtv0: Create encoder radio stream
> tuner: type set to 68 (Samsung TCPN 2121P30A) by ivtv i2c driver #0
> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
> ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11
> ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
> tveeprom: Second (radio) tuner idx 101
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 23552, rev = E587, serial# = 8825862
> tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 68)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
> ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
> cx25840 1-0044: ivtv driver
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
> wm8775 1-001b: ivtv driver
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
> ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
> ivtv1: This is the second unit of a PVR500
> ivtv1: Correcting tveeprom data: no radio present on second unit
> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv1: Encoder revision: 0x02050032
> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total)
> ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
> (2048KB total)
> tuner: type set to 68 (Samsung TCPN 2121P30A) by ivtv i2c driver #1
> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> ivtv: ==================== END INIT IVTV ====================
>
> ----
> Adam
>
>------------------------------------------------------------------------
>
>_______________________________________________
>ivtv-users mailing list
>[email protected]
>http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
