Uhhhhh.... shouldn't your lspci include something like this:
01:08.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Don
Hans Verkuil wrote:
I know of only one issue that may remotely cause this problem: the
saa7127 module has a problem with the saa7129 chip. So if the old card
uses a saa7127 and the new one a saa7129 then you need to use kernel
2.16.16.12 or up. Or apply the misc/saa7127.diff patch by hand.
Still, it's somewhat unlikely that this would completely hang the
computer, usually it just results in bad TV-out quality.
Hans
On Friday 26 May 2006 05:23, Joe M. wrote:
I have been using a PVR-350 for several months in a MythTV box I
built and have been quite happy with it. I just purchased a second
PVR-350 for a second computer of mine. Both computers are running
Fedora Core 4 Linux OS. I can use my older PVR-350 in both machines
with no problem, but if I put the new PVR-350 in either machine the
machine locks up during the boot process if I have the ivtv drivers
loaded. I am trying to determine if the new card is bad, or if the
new card may not be compatible with the latest ivtv drivers from
Atrpms.net (ivtv-0.6.2-110.rhfc4.at,
ivtv-kmdl-2.6.16-1.2111_FC4-0.6.2-110.rhfc4.at,
kernel-2.6.16-1.2111_FC4). I have tried several different kernel
versions and ivtv driver versions, but the behavior is the same - the
older card works fine, the new one locks up the machine. Is there a
way I can determine if this is a new card version that the ivtv
drivers don't yet know how to handle, or should I assume the card is
bad and return it?
There are no errors in /var/log/messages when the machines lock up,
and it locks up before the "START INIT IVTV" section, so there is
nothing to indicate what the problem is.
If I unload the ivtv driver, I can boot the machine with the new
PVR-350 in it. I can then load the ivtv driver, and run "depmod -a",
but when I run "modprobe ivtv" the system hangs and I'm back to not
being able to get back to the same place until I shut down,
physically remove the card, boot up the system, unload the ivtv
driver, shut down, replace the card, then boot back up.
My modprobe.conf and lspci -v output are below. Remember, this
configuration works fine with my other PVR-350 just not the brand new
one. I installed the systems using Jarod's guide. Any assistance
would be appreciated. Thanks in advance.
-Joe
# cat /etc/modprobe.conf
alias eth0 8139too
alias usb-controller uhci-hcd
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
}; /sbin/modprobe -r --ignore-remove snd-emu10k1
alias ieee1394-controller ohci1394
alias char-major-81 ivtv
alias char-major-81-0 ivtv
# install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe
ivtv-fb
# lspci -v
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 03)
Flags: bus master, medium devsel, latency 32
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev
02) Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 32
I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at a000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player/OEM
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a400 [size=32]
Capabilities: [dc] Power Management version 2
00:0b.1 Input device controller: Creative Labs SB Audigy MIDI/Game
port (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Flags: bus master, medium devsel, latency 32
I/O ports at a800 [size=8]
Capabilities: [dc] Power Management version 2
00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
(prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e6214000 (32-bit, non-prefetchable) [size=2K]
Memory at e6210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at ac00 [size=256]
Memory at e6215000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
00:11.0 VGA compatible controller: Trident Microsystems TGUI 9440
(rev e3) (prog-if 00 [VGA])
Flags: medium devsel, IRQ 10
Memory at e6000000 (32-bit, non-prefetchable) [size=2M]
Memory at e6200000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at e4000000 [disabled] [size=64K]
00:13.0 Mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372/372N (rev 01)
Flags: bus master, medium devsel, latency 120, IRQ 11
I/O ports at b000 [size=8]
I/O ports at b400 [size=4]
I/O ports at b800 [size=256]
Expansion ROM at e5000000 [disabled by cmd] [size=128K]
00:13.1 Mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372/372N (rev 01)
Flags: bus master, medium devsel, latency 120, IRQ 11
I/O ports at bc00 [size=8]
I/O ports at c000 [size=4]
I/O ports at c400 [size=256]
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
|
