Hi.
I'm unable to get my IR working on the new PVR-150. lirc-0.8.1-CVS-pvr150
Here's some bits of 'dmesg':
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.2 (tagged release) loading
ivtv: Linux version: 2.6.16-1.2122_FC5 686 REGPARM 4KSTACKS gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 1-0050: Hauppauge model 26132, rev F0B2, serial# 9400151
tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25841 (idx 35)
tveeprom 1-0050: decoder processor is CX25841 (idx 28)
tveeprom 1-0050: has no radio, has IR remote
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
<snip>
lirc_dev: IR Remote Control driver registered, at major 61
lirc_pvr150: no version for "lirc_unregister_plugin" found: kernel tainted.
lirc_pvr150: probe 0x70 @ ivtv i2c driver #0: no
lirc_pvr150: probe 0x71 @ ivtv i2c driver #0: no
lirc_pvr150: ivtv i2c driver #0: no devices found
Looks like the tuner is at i2c 0x0061, with nothing at 0x0070 or 0x0071
i2c-1 unknown ivtv i2c driver #0
Algorithm unavailable
i2c-0 unknown SMBus Via Pro adapter at 5000
Algorithm unavailable
[EMAIL PROTECTED] lirc-0.8.1-CVS-pvr150]# i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX UU XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: XX XX XX XX UU XX XX XX XX XX XX XX XX XX XX XX
50: UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX UU XX XX XX XX XX XX XX XX XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX
Is TVEEPROM not registering the i2c device??
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
