I try to use "AOpen VA2000MAX-SNT6", with your debian package: ivtv0.6-source, ivtv0.6-utils (via. http://www.hellion.org.uk/ivtv/index.html) and linux-source-2.6.16 (via. unstable)
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.2 (tagged release) loading ivtv: Linux version: 2.6.16-12-686-smp-debsrc-ivtv-2 SMP PENTIUM4 REGPARM gcc-4 .0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected AOpen VA2000MAX-SNT6 card (cx23416 based) ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 185 tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) saa7115 1-0021: saa7114 found @ 0x42 (ivtv i2c driver #0) upd64083 1-005c: chip found @ 0xb8 (ivtv i2c driver #0) msp3400 1-0040: MSP3455G-B8 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP3455G-B8 supports nicam and radio, mode is autodetect and aut oselect ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02040011 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0060: type set to 53 (Philips FQ1286) ivtv0: Initialized AOpen VA2000MAX-SNT6, card #0 ivtv: ==================== END INIT IVTV ==================== it seems that ivtv module works fine, but 'cat /dev/video0 > test.mpg' doesn't work.(test.mpg is a empty file) How do I get data from /dev/video0? Thanks. -- Kazuhiko Uebayashi _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
