oops, yes
echo -n $"Starting infrared remote control daemon ($prog): "
/sbin/modprobe lirc_i2c
daemon $exec $LIRCD_OPTIONS
still no change though.
[EMAIL PROTECTED] init.d]# service lirc stop
Stopping infrared remote control daemon (lircd): [ OK ]
[EMAIL PROTECTED] init.d]#
[EMAIL PROTECTED] init.d]# rmmod lirc_i2c lirc_dev
[EMAIL PROTECTED] init.d]# lsmod | grep lirc
[EMAIL PROTECTED] init.d]#
[EMAIL PROTECTED] init.d]# service lirc start
Starting infrared remote control daemon (lircd): [ OK ]
[EMAIL PROTECTED] init.d]# lsmod | grep lirc
lirc_i2c 9348 0
lirc_dev 14756 1 lirc_i2c
i2c_core 20673 11
lirc_i2c,cx88xx,bttv,wm8775,cx25840,tda9887,tuner,ivtv,i2c_algo_bit,tveeprom,i2c_viapro
[EMAIL PROTECTED] init.d]# ls /dev/lirc* -l
crw-r--r-- 1 root root 61, 0 Jun 2 12:50 /dev/lirc
crw-r--r-- 1 root root 61, 0 Jun 2 11:49 /dev/lirc0
srw-rw-rw- 1 root root 0 Jun 2 14:58 /dev/lircd
prw-r--r-- 1 root root 0 Jun 2 12:50 /dev/lircm
[EMAIL PROTECTED] init.d]# mode2 -d /dev/lirc
mode2: error opening /dev/lirc
mode2: No such device
[EMAIL PROTECTED] init.d]# mode2 -d /dev/lirc0
mode2: error opening /dev/lirc0
mode2: No such device
[EMAIL PROTECTED] init.d]#
dmesg:
lirc_dev: module successfully unloaded
lirc_dev: IR Remote Control driver registered, at major 61
lirc_dev ([-1]): open called
lirc_dev ([-1]): open result = -ENODEV
lirc_dev ([-1]): open called
lirc_dev ([-1]): open result = -ENODEV
[EMAIL PROTECTED] init.d]# tail /var/log/messages
Jun 2 14:57:24 media lircd-0.8.0[13433]: caught signal
Jun 2 14:58:33 media kernel: lirc_dev: IR Remote Control driver registered,
at major 61
Jun 2 14:58:33 media lircd-0.8.0[13506]: lircd(userspace) ready
----- Original Message -----
From: "Greg Woods" <[EMAIL PROTECTED]>
To: "Simon Baxter" <[EMAIL PROTECTED]>
Cc: "User discussion about IVTV" <[email protected]>
Sent: Friday, June 02, 2006 2:47 PM
Subject: Re: [ivtv-users] LIRCD on PVR-150 no go. TVEEPROM problem??
> On Fri, 2006-06-02 at 14:38 -0700, Simon Baxter wrote:
>
>> echo -n $"Starting infrared remote control daemon ($prog): "
>> daemon $exec $LIRCD_OPTIONS
>> /sbin/modprobe lirc_i2c
>
> You need to modprobe first, then start lircd. Also, you need to do
>
> chkconfig --add lirc
>
> ..to get it started at boot time. That creates links to the file in the
> rc?.d directories, which is what gets read at boot time.
>
>
> --Greg
>
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
