Please try the 0.6.3 dev. snapshot
http://ivtvdriver.org/viewcvs/ivtv/branches/0.6.tar.gz?view=tar.
Use the 'newi2c=0' ivtv module option. This looks very much like a
similar problem reported to me that I'm trying to fix. Using this
option seems to improve matters.
Hans
On Monday 12 June 2006 00:28, Will wrote:
> I was running this PVR500 (with Phillips tuners) with out any trouble
> using FC4 and ivtv 0.4 about a month ago. Recently I decided to
> install a 2.6.16 kernel and chose Gentoo. Because of this I had to
> update ivtv to 0.6.x. I have tried 0.6.1 and 0.6.2 and with both of
> them my second tuner seems to "dead".
>
> If I try a 'cat /dev/v4l/video1 > /storage/temp.mpg' I just get an
> empty file. The same command works fine with /dev/v4l/video0. I used
> ivtv-tune and both tuners report a signal detected when I tune to
> 79.2625 (I have us-cable-irc).
>
> I tried looking around but couldn't really find anything relevant. I
> did notice someone else was having trouble with their first tuner of
> a PVR500 in Gentoo 2.6.16, so maybe they are related? Here are the
> ivtv init messages:
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.6.2 (tagged release) loading
> ivtv: Linux version: 2.6.16-gentoo-r7 SMP preempt K7 gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
> ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level,
> low) -> IRQ 20 ivtv0: Unreasonably low latency timer, setting to 64
> (was 32) tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:00.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [APC3] -> GSI 18 (level,
> low) -> IRQ 16 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:01.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [APC4] -> GSI 19 (level,
> low) -> IRQ 18 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:02.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
> ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [APC1] -> GSI 16 (level,
> low) -> IRQ 21 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:03.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [APC2] -> GSI 17 (level,
> low) -> IRQ 20 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:04.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [APC3] -> GSI 18 (level,
> low) -> IRQ 16 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:05.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [APC4] -> GSI 19 (level,
> low) -> IRQ 18 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:06.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC1] -> GSI 16 (level,
> low) -> IRQ 21 tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: Encoder mailbox not found
> ivtv0 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:07.0 failed with error -12
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC2] -> GSI 17 (level,
> low) -> IRQ 20 ivtv0: Unreasonably low latency timer, setting to 64
> (was 0) tuner 0-0060: TEA5767 detected.
> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> tveeprom 0-0050: Hauppauge model 23552, rev D592, serial# 2995307
> tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio
> (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx
> 37)
> tveeprom 0-0050: decoder processor is CX25843 (idx 30)
> tveeprom 0-0050: has radio, has no IR remote
> ivtv0: This is the first unit of a PVR500
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream
> tuner 0-0061: type set to 57 (Philips FQ1236A MK4)
> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
>
> ...
> Then there are a bunch of these with different IRQs (16,18,21,20)
> repeating for different PCI Interrupts. I would post all, but the
> message is too long. ...
>
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC3] -> GSI 18 (level,
> low) -> IRQ 16 tveeprom 1-0050: Huh, no eeprom present (err=-121)?
> tveeprom 1-0050: Encountered bad packet header [d0]. Corrupt or not a
> Hauppauge eeprom. ivtv1: No tuner detected, default to NTSC
> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv1 warning: Encoder mailbox not found
> ivtv1 warning: Decoder mailbox not found
> ivtv: probe of 0000:02:09.0 failed with error -12
>
> ...
>
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:1f.0[A] -> Link [APC1] -> GSI 16 (level,
> low) -> IRQ 21 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1)
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
> tveeprom 1-0050: Hauppauge model 23552, rev D592, serial# 2995307
> tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
> tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio
> (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx
> 37)
> tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> tveeprom 1-0050: has radio, has no IR remote
> ivtv1: This is the second unit of a PVR500
> ivtv1: Correcting tveeprom data: no radio present on second unit
> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv1: Encoder revision: 0x02050032
> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
> buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 57
> (Philips FQ1236A MK4)
> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> ivtv: ==================== END INIT IVTV ====================
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
