I recently installed the ATrpm incarnation of ivtv 0.6.2 on an updated FC5 machine.  I'm using a HP 250 card which worked well in a different machine under FC4.

I tried both with and without extra "alias" lines added to modprobe.conf, with no effect.  I saw some discussion of similar problems in the 0.4
series here,

http://www.gossamer-threads.com/lists/ivtv/users/27261

where the problem appeared to be a 64-bit/32-bit memcopy issue.

Kernel is 2.6.16-1.2133_FC5 (x86_64 version).

lspci shows:

00:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. Unknown device 4801
        Flags: bus master, fast devsel, latency 64, IRQ 17
        Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

dmesg shows:

ivtv: no version for "struct_module" found: kernel tainted.
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.6.2 (development snapshot compiled on Mon Jun 12 18:52:04 2006) loading
ivtv:  Linux version: 2.6.16-1.2133_FC5 SMP gcc-4.1
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: No tuner detected, default to NTSC
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0 warning: Encoder mailbox not found
ivtv0 warning: Decoder mailbox not found
ivtv0: Error locating firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:00:0a.0 failed with error -12
ivtv:  ====================  END INIT IVTV  ====================

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to