I had this problem too. Not sure if it will help you or not, but the fix for me was to append "pci=routeirq" to my kernel options in grub.conf (or lilo.conf). Just FYI, I haven't had much luck w/ the 0.6.x series. 0.4.5 worked well for me, so I'm going to be downgrading my kernel to 2.6.15 (had to have new kernel for new drivers for new mobo) and ivtv 0.4.5... Anyway, good luck!
Regards, David Reitz [EMAIL PROTECTED] >I recently installed the ATrpm incarnation of ivtv 0.6.2 on an updated FC5 >machine. I'm using a HP 250 card which worked well in a different machine >under FC4. > >I tried both with and without extra "alias" lines added to modprobe.conf, >with no effect. I saw some discussion of similar problems in the 0.4 >series here, > >http://www.gossamer-threads.com/lists/ivtv/users/27261 > >where the problem appeared to be a 64-bit/32-bit memcopy issue. > >Kernel is 2.6.16-1.2133_FC5 (x86_64 version). > >lspci shows: > >00:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 >Encoder (rev 01) > Subsystem: Hauppauge computer works Inc. Unknown device 4801 > Flags: bus master, fast devsel, latency 64, IRQ 17 > Memory at e8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > >dmesg shows: > >ivtv: no version for "struct_module" found: kernel tainted. >ivtv: ==================== START INIT IVTV ==================== >ivtv: version 0.6.2 (development snapshot compiled on Mon Jun 12 18:52:04 >2006) loading >ivtv: Linux version: 2.6.16-1.2133_FC5 SMP gcc-4.1 >ivtv: In case of problems please include the debug info between >ivtv: the START INIT IVTV and END INIT IVTV lines, along with >ivtv: any module options, when mailing the ivtv-users mailinglist. >ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based) >ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >ivtv0: No tuner detected, default to NTSC >ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) >ivtv0 warning: Encoder mailbox not found >ivtv0 warning: Decoder mailbox not found >ivtv0: Error locating firmware. >ivtv0: Error -12 on initialization >ivtv: probe of 0000:00:0a.0 failed with error -12 >ivtv: ==================== END INIT IVTV ==================== > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
