Hi, When using the default options, I get sound on channel A, but not on channel B.
When I use options tda9887 qss=0 I get no sound on channel A, but sound on channel B (albeit very noisy). Any pointers? Thanks! Peter ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.3 (tagged release) loading ivtv: Linux version: 2.6.16-gentoo-r9 preempt PENTIUMM gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 8895801 tveeprom 1-0050: tuner model is Samsung TCPG_6121P30A (idx 96, type 4) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv0: This is the first unit of a PVR500 tuner 1-0060: TEA5767 detected. tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #1) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 23559, rev D596, serial# 8895801 tveeprom 2-0050: tuner model is Samsung TCPG_6121P30A (idx 96, type 4) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ====================
pgprsThouI2F7.pgp
Description: PGP signature
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
