can anyone help with the following output when doing modprobe ivtv? i have the modules it complains at built and they can load fine with just using modprobe. if i manually load them (with modprobe) nothing changes with the output, can anyone suggest any ideas of what to try / how to fix it ?
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17.6 mod_unload K7 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 20 ivtv0: Failed to load module tveeprom tveeprom 2-0050: Hauppauge model 48135, rev J324, serial# 7244291 tveeprom 2-0050: tuner model is Philips FM1246 (idx 24, type 1) tveeprom 2-0050: TV standards PAL(I) (eeprom 0x10) tveeprom 2-0050: audio processor is MSP4418 (idx 25) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote ivtv0: Failed to load module tuner ivtv0: Failed to load module tda9887 ivtv0: Failed to load module saa7115 ivtv0: Failed to load module saa7127 ivtv0: Failed to load module msp3400 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c addr 0x21 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== cheers, Mike _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
