IVTV Users, Thank you to everyone on this list for their time and effort in assisting people such as myself with IVTV issues.
I've upgraded my kernel to 2.6.17.7, and so I downloaded and installed IVTV 0.7.0. When I run dmesg, the IVTV output reports errors. But they are rather cryptic, so I'm not sure what to do to correct them. Can someone more knowledgeable decipher this and let me know what to do? Any advice would be much appreciated. [4314542.485000] ivtv: ==================== START INIT IVTV ==================== [4314542.485000] ivtv: version 0.7.0 (tagged release) loading [4314542.485000] ivtv: Linux version: 2.6.17.7 SMP mod_unload 686 gcc-4.0 [4314542.485000] ivtv: In case of problems please include the debug info between [4314542.485000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [4314542.485000] ivtv: any module options, when mailing the ivtv-users mailinglist. [4314542.485000] ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) [4314542.486000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 22 (level, low) -> IRQ 58 [4314542.537000] tveeprom 3-0050: Hauppauge model 26052, rev C199, serial# 7938073 [4314542.537000] tveeprom 3-0050: tuner model is TCL 2002N 5H (idx 99, type 50) [4314542.537000] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) [4314542.537000] tveeprom 3-0050: audio processor is CX25843 (idx 37) [4314542.537000] tveeprom 3-0050: decoder processor is CX25843 (idx 30) [4314542.537000] tveeprom 3-0050: has no radio, has IR remote [4314542.608000] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) [4314542.849000] ivtv0: Failed to load module cx25840 [4314542.870000] ivtv0: Failed to load module wm8775 [4314543.520000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [4314543.742000] ivtv0: Encoder revision: 0x02050032 [4314543.743000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) [4314543.743000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) [4314543.744000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) [4314543.744000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) [4314543.745000] tuner 3-0061: type set to 50 (TCL 2002N) [4314543.745000] ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! [4314543.745000] ivtv0: i2c addr 0x44 not found for command 0x4008646f! [4314543.745000] ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d! [4314543.745000] ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d! [4314543.745000] ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! [4314543.746000] ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! [4314543.747000] ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! [4314543.747000] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [4314543.747000] ivtv: ==================== END INIT IVTV ==================== -- Dave M G _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
