I'm unsure of exactly what card I'm using. It was removed from a Sony 
Vaio machine. Sony's site didn't have any details on the card itself. I 
can take a picture of the card and it's chips if they would help at all?

Can anyone verify if this is the Sony Giga Pocket PVR based on the 
subsystem vendor/device #?

my dmesg output is

Linux video capture interface: v1.00
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.7.0 (tagged release) loading
ivtv:  Linux version: 2.6.17 preempt mod_unload PENTIUM4 gcc-3.3
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0:               subsystem vendor/device: 104d/801d
ivtv0:               cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and 
what kind of
ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN CARD].
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 3 (level, low) 
-> IRQ 3
tveeprom 4-0050: Encountered bad packet header [aa]. Corrupt or not a 
Hauppauge eeprom.
ivtv0: No tuner detected, default to NTSC
ivtv0: Failed to load module wm8775
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c addr 0x44 not found for command 0x4008646f!
ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================

lspci -v

02:05.0 Multimedia video controller: Internext Compression Inc iTVC16 
(CX23416) MPEG-2 Encoder (rev 01)
       Subsystem: Sony Corporation: Unknown device 801d
       Flags: bus master, medium devsel, latency 64, IRQ 3
       Memory at d0000000 (32-bit, prefetchable) [size=64M]
       Capabilities: [44] Power Management version 2



_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to