I've tried installing 0.6.3 and the pcHDTV-5500 but there seems to be a conflict with tveeprom and possibly other modules. I'm running Gentoo with 2.6.16-gentoo-r9 kernel which does not recognize the pcHDTV-5500. It apparently only supports the 2000 and 3000. So, I have to use their drivers. If I don't install their drivers, the Hauppauge cards work fine. Once I install their drivers, they wipe out several kernel modules with their own. Once that's done, the Hauppauge cards start complaining. Attached is part of the dmesg output...
videodev: exports duplicate symbol video_register_device (owned by kernel) cx2388x dvb driver version 0.0.5 loaded CORE cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected] TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe ACPI: PCI Interrupt 0000:00:09.2[A] -> GSI 19 (level, low) -> IRQ 17 cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 17, latency: 32, mmio: 0xf5000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... videodev: exports duplicate symbol video_register_device (owned by kernel) v4l1_compat: exports duplicate symbol v4l_compat_translate_ioctl (owned by kernel) ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.3 (tagged release) loading ivtv: Linux version: 2.6.16-gentoo-r9 SMP preempt PENTIUMIII gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Hauppauge model 26582, rev C299, serial# 8443615 tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has no radio, has no IR remote v4l2_common: exports duplicate symbol v4l2_video_std_construct (owned by kernel) tuner 0-0061: chip found @ 0xc2 (cx88[0]) tuner 0-0061: type set to 64 (LG TDVS-H062F/TUA6034) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (cx88[0]) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 19 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 48132, rev J323, serial# 7205934 tveeprom 2-0050: tuner model is Philips FM1236 (idx 23, type 2) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP4448 (idx 27) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote v4l2_common: exports duplicate symbol v4l2_video_std_construct (owned by kernel) saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #1) v4l2_common: exports duplicate symbol v4l2_video_std_construct (owned by kernel) msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1) msp3400 2-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream ivtv1: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv1: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv1: Create decoder VOUT stream ivtv1: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv1: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv1: Initialized Hauppauge WinTV PVR-350, card #1 ivtv: ==================== END INIT IVTV ==================== All of the modules load, but strangely, I can't set the input of the Hauppauge cards. No matter what I try to set them to, they always seem stuck on the Composite input. (I'm needing the s-video input). Here's some status info from ivtvctl --log-status: ivtv0: ================= START STATUS CARD #0 ================= tveeprom 1-0050: Hauppauge model 26582, rev C299, serial# 8443615 tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has no radio, has no IR remote tuner 1-0061: Tuner mode: analog TV tuner 1-0061: Frequency: 67.25 MHz tuner 1-0061: Standard: 0x00003000 cx25840 1-0044: Video signal: not present cx25840 1-0044: Detected format: NTSC-M cx25840 1-0044: Detected audio mode: forced mode cx25840 1-0044: Detected audio standard: forced audio standard cx25840 1-0044: Audio muted: no cx25840 1-0044: Audio microcontroller: running cx25840 1-0044: Configured audio standard: BTSC cx25840 1-0044: Configured audio mode: undefined cx25840 1-0044: Specified standard: NTSC-M cx25840 1-0044: Specified video input: Composite 7 cx25840 1-0044: Specified audio input: Tuner (In8) cx25840 1-0044: Specified audioclock freq: 48000 Hz cx25840 1-0044: Preferred audio mode: stereo cx25840 1-0044: Selected 65 MHz format: system DK cx25840 1-0044: Selected 45 MHz format: chroma wm8775 1-001b: Input: 2 ivtv0: ================== END STATUS CARD #0 ================== Is there a way to get all of these cards to coexist?
<<attachment: winmail.dat>>
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
