I have been trying to get 0.7.0 working with my PVR-150 in MythTV and cannot seem to get it to work. The tuner comes up unrecognized and displays only static. IVTV 0.4.4 works just fine as long as I force the tuner with:
options ivtv tuner=50 in my modules file. In 0.7.0 the same thing does not work. I have tried various thing to no avail - any suggestions? Here are some details from my logs. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 3-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) tveeprom 3-0050: tuner model is TCL M2523_5N_E (idx 112, type 4) tuner 3-0061: tuner type not set _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
