On Tuesday 19 September 2006 18:39, Sanjay Darisi wrote:
> Sanjay Darisi wrote:
> > Sanjay Darisi wrote:
> >> Hello everybody,
> >>
> >> I've got a new Hauppauge WinTV PVR 350 Analog TV tuner card. I've got
> >> the ivtv driver compiled and installed. But couldn't get any player to
> >> work with my tv tuner card. I have knoppix 5.0 installed on my primary
> >> sata drive with 2.6.17 kernel. I've googled a lot for mplayer options to
> >> play with no success so far.
> >>
> >> When I tried mplayer /dev/video0
> >>
> >> MPlayer 1.0pre8-4.0.4 (C) 2000-2006 MPlayer Team
> >> CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (Family: 15, Model:
> >> 4, Stepping: 3)
> >> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
> >> Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
> >>
> >>
> >> /usr/share/fonts/truetype/openoffice/congar.ttf doesn't look like a font
> >> description, ignoring.
> >> Cannot load font: /usr/share/fonts/truetype/openoffice/congar.ttf
> >> Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
> >> Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
> >> startup scripts.
> >>
> >> Playing /dev/video0.
> >> MPEG-PS file format detected.
> >> VIDEO: MPEG2 640x480 (aspect 2) 25.000 fps 9600.0 kbps (1200.0
> >> kbyte/s)
> >> ========================================================================
> >>== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> >> AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000)
> >> Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
> >> ========================================================================
> >>==
> >> ========================================================================
> >>== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
> >> VDec: vo config request - 640 x 480 (preferred colorspace: Mpeg PES)
> >> Could not find matching colorspace - retrying with -vf scale...
> >> The selected video_out device is incompatible with this codec.
> >> Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
> >> VDecoder init failed :(
> >> Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder
> >> libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or
> >> 2 (libmpeg2))
> >> ========================================================================
> >>== [AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or
> >> resource busy
> >> AO: [null] 48000Hz 2ch s16le (2 bytes per sample)
> >> Starting playback...
> >> VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
> >> Could not find matching colorspace - retrying with -vf scale...
> >> Opening video filter: [scale]
> >> VDec: using Planar YV12 as output csp (no 0)
> >> Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> >> SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
> >> VO: [fbdev] 640x480 => 640x480 BGR 16-bit
> >> A: 22.6 V: 22.6 A-V: 0.006 ct: -0.310 545/545 7% 11% 2.1% 0 0
> >>
> >>
> >>
> >> goes on... no video though.
> >>
> >> Any ideas of what I'm missing??
> >>
> >> Appreciate any help.
> >
> > I tried with
> >
> > mplayer /dev/video0 -dumpstream
> >
> > and it did create a file 'stream.dump'. I was able to play that mpeg
> > file with xine player. I wasn't able to play with mplayer though, it
> > just flickers on the top of the screen.
> >
> > Anyways, any ideas how to watch analog tv with xine. I know that new
> > xine version does support wintv 250/350 pvr.
> >
> > I'd really appreciate if anybody can give me the exact mrl for watching
> > tv in xine.
>
> Figured a way to use xine to watch tv from my card.
>
> cat /dev/video0 | xine stdin:/
>
> did the trick.
>
> I'm still not sure why mplayer doesn't play any video. I think its
> something to do with video scaling or X video extension of my X.org
> (7.x) server and the graphics card (ATI Radeon X300).
Do you use the binary only driver from ATI ?
When yes, XV is disabled by default in the ATI-driver. Use this Options in
your xorg.conf driver section to enable XV.
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
or use "mplayer -vo gl2 ..." to make mplayer use GL as videoout.
greets,
Tami
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
