Hello, > But with "modprobe ivtv" loading of some modules fails: > > > saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) > msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) > msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect > and autoselect ivtv0: Failed to load module tveeprom > tveeprom 1-0050: Hauppauge model 48134, rev J342, serial# 7067564 > tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20) > tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) > tveeprom 1-0050: audio processor is MSP4418 (idx 25) > tveeprom 1-0050: decoder processor is SAA7115 (idx 19) > tveeprom 1-0050: has radio, has IR remote > ivtv0: Failed to load module tuner > ivtv0: Failed to load module tda9887 > ivtv0: Failed to load module saa7115 > ivtv0: Failed to load module saa7127 > ivtv0: Failed to load module msp3400 > > > The modules are in the folder: > > /lib/modules/2.6.17-gentoo-r7/kernel/drivers/media/video > > I've put the modules in the file /etc/modules.autoload.d/kernel-2.6 to be > autoloaded by startup: > > tveeprom > tuner > tda9887 > saa7115 > saa7127 > msp3400 > I am also gentoo user, the same kernel && ivtv. There is no need to have these modules (tveeprom, tuner.....e . t. c. ) explicitly mentioned in /etc/modules.autoload.d/kernel-2.6. They will be loaded atomatically with modprobe ivtv (see the dependency file /lib/modules/<version>/modules.dep At least, it works for me. And, modules mentioned in /etc/modules.autoload.d/kernel-2.6 are loaded BEFORE any other module, therefore when ivtv module tries to load them, it must fail because they are loaded already.
-- Jan Taimr --------------------------------------- The worst computer virus is an end-user --------------------------------------- _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
