I was using kernel 2.6.16 with ivtv 0.6.2 successfully until i switched to 2.6.18-rc7-mm1 and ivtv 0.7.Since then i have no sound.Video plays as before I have a prv 150 my log is:
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.18-rc7-mm1 preempt mod_unload K7 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) PCI: Enabling device 0000:00:0d.0 (0014 -> 0016) ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 tveeprom 3-0050: Hauppauge model 26134, rev F0B3, serial# 9474252 tveeprom 3-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55) tveeprom 3-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44) tveeprom 3-0050: audio processor is CX25842 (idx 36) tveeprom 3-0050: decoder processor is CX25842 (idx 29) tveeprom 3-0050: has no radio, has IR remote tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: Failed to load module tda9887 cx25840 3-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) kobject_add failed for i2c-3 with -EEXIST, don't try to register things with the same name in the same directory. [<c0222438>] kobject_add+0x162/0x189 [<c027a8c2>] device_add+0x94/0x396 [<c027a430>] klist_children_put+0x0/0xa [<e0987180>] _request_firmware+0x114/0x2ca [firmware_class] [<e1cc33f0>] cx25840_loadfw+0x2a/0x1ba [cx25840] [<e1cc1725>] cx25840_initialize+0x140/0x252 [cx25840] [<e1cc2cb2>] cx25840_detect_client+0x1e7/0x1f9 [cx25840] [<c02c1eba>] i2c_probe_address+0x8c/0xc5 [<c02c2031>] i2c_probe+0x13e/0x149 [<e1cc2acb>] cx25840_detect_client+0x0/0x1f9 [cx25840] [<e1cc1041>] cx25840_attach_adapter+0x1c/0x20 [cx25840] [<e1cc2acb>] cx25840_detect_client+0x0/0x1f9 [cx25840] [<c02c2483>] i2c_register_driver+0x6a/0x8b [<e0a0400f>] m__init+0xf/0x12 [cx25840] [<c012e7c0>] sys_init_module+0x1323/0x14bf [<c0102be2>] sysenter_past_esp+0x5f/0x85 ======================= fw_register_device: device_register failed cx25840 3-0044: unable to open firmware v4l-cx25840.fw wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 3-0061: type set to 55 (TCL 2002MB) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== Ive searched for the tda module in the kernel and it seems it has been removed.(I suppose the warning ivtv gives about it is harmless). The firmware it claims it failed to load is in place (/lib/firmware ) though i suppose the cause of my problem is the "kobject_add failed" failed message. I also have two dvb cards on the same box (a skystar2 dvb-s and a nova-t dvb-t) working fine. Sorry if i have missed something :) Any help appreciated. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
