At this time i use the same versions (ivtv 0.7.1 an myth 0.20) and i'm still experiencing the same problems. For the i686 kernel, I indeed did a reinstall. It has a disadvantage, the powernow module is not included.
Johan. >From: "Antispam - dontspamed" <[EMAIL PROTECTED]> >Reply-To: User discussion about IVTV <[email protected]> >To: "User discussion about IVTV" <[email protected]> >Subject: Re: [ivtv-users] Change channel only works once >Date: Tue, 3 Oct 2006 12:24:14 -0700 > >I am also having this issue. I run mythtv .20 and IVTV 0.7.1 from >ATRPMS. I have an intel P3 slave box with no issues. This only affects >my master x64 box. I have a single processor only. Is anybody working >on this? How can we help? >Johan, how did you switch to i686 kernel? Does that require a complete >reinstall? >Ed > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Johan Bakker >Sent: Monday, September 25, 2006 1:44 AM >To: [email protected] >Subject: [ivtv-users] Change channel only works once > >I'am using mythtv with ivtv 0.7.0 on FC5. The hardware is a x86_64 >(Sempron >3000+). > >When i "Watch TV" it works fine as long as i do not change channels. The > >first "Watch TV" sessions always works (even changing channels). When i >changed channel during this session, the second session hangs. >Mythbackend >shows as <defunc>. >Changing channels using mythfrontend has the same effect as using >ivtv-tune. > >The problem occurs on all x86_64 kernels i tried. I recompiled the >kernel >without SMP support, but the same problem persists. >When i install the FC5 i686 kernel, the problem has disappeared. > >I included some logging. >Hope someone can help me. > >Johan. > >Linux mythtv.thuis.nl 2.6.17-1.2187_FC5 #1 SMP Mon Sep 11 01:16:59 EDT >2006 >x86_64 x86_64 x86_64 GNU/Linux > >The card detection looks ok to me > >Sep 25 09:19:45 mythtv kernel: ivtv: ==================== START INIT >IVTV >==================== >Sep 25 09:19:45 mythtv kernel: ivtv: version 0.7.0 (tagged release) >loading >Sep 25 09:19:45 mythtv kernel: ivtv: Linux version: 2.6.17-1.2187_FC5 >SMP >mod_unload gcc-4.1 >Sep 25 09:19:45 mythtv kernel: ivtv: In case of problems please include >the >debug info between >Sep 25 09:19:45 mythtv kernel: ivtv: the START INIT IVTV and END INIT >IVTV >lines, along with >Sep 25 09:19:45 mythtv kernel: ivtv: any module options, when mailing >the >ivtv-users mailinglist. >Sep 25 09:19:45 mythtv kernel: ivtv0: Autodetected Hauppauge WinTV >PVR-150 >card (cx23416 based) >Sep 25 09:19:45 mythtv kernel: ACPI: PCI Interrupt 0000:02:06.0[A] -> >GSI 19 >(level, low) -> IRQ 169 >Sep 25 09:19:45 mythtv kernel: tveeprom 0-0050: Hauppauge model 26559, >rev >G189, serial# 9809958 >Sep 25 09:19:45 mythtv kernel: tveeprom 0-0050: tuner model is TCL >MFPE05 2 >(idx 89, type 38) >Sep 25 09:19:45 mythtv kernel: tveeprom 0-0050: TV standards PAL(B/G) >PAL(I) >SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) >Sep 25 09:19:45 mythtv kernel: tveeprom 0-0050: audio processor is >CX25843 >(idx 37) >Sep 25 09:19:45 mythtv kernel: tveeprom 0-0050: decoder processor is >CX25843 >(idx 30) >Sep 25 09:19:45 mythtv kernel: tveeprom 0-0050: has radio, has no IR >remote >Sep 25 09:19:45 mythtv kernel: usb 3-3: device descriptor read/64, error > >-110 >Sep 25 09:19:45 mythtv kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c > >driver #0) >Sep 25 09:19:45 mythtv kernel: tda9887 0-0043: chip found @ 0x86 (ivtv >i2c >driver #0) >Sep 25 09:19:45 mythtv kernel: cx25840 0-0044: cx25843-23 found @ 0x88 >(ivtv >i2c driver #0) >Sep 25 09:19:45 mythtv kernel: usb 3-3: new low speed USB device using >ohci_hcd and address 3 >Sep 25 09:19:45 mythtv kernel: usb 3-3: device descriptor read/64, error > >-110 >Sep 25 09:19:45 mythtv kernel: usb 3-3: device descriptor read/64, error > >-110 >Sep 25 09:19:45 mythtv kernel: usb 3-3: new low speed USB device using >ohci_hcd and address 4 >Sep 25 09:19:45 mythtv kernel: usb 3-3: device not accepting address 4, >error -110 >Sep 25 09:19:45 mythtv kernel: usb 3-3: new low speed USB device using >ohci_hcd and address 5 >Sep 25 09:19:45 mythtv kernel: usb 3-3: device not accepting address 5, >error -110 >Sep 25 09:19:45 mythtv kernel: cx25840 0-0044: loaded v4l-cx25840.fw >firmware (16382 bytes) >Sep 25 09:19:45 mythtv kernel: wm8775 0-001b: chip found @ 0x36 (ivtv >i2c >driver #0) >22Sep 25 09:19:45 mythtv xinetd[2060]: xinetd Version 2.3.13 started >with >libwrap loadavg options compiled in. >Sep 25 09:19:45 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware > >(262144 bytes) >Sep 25 09:19:45 mythtv xinetd[2060]: Started working: 0 available >services >Sep 25 09:19:45 mythtv kernel: ivtv0: Encoder revision: 0x02050032 >Sep 25 09:19:45 mythtv kernel: ivtv0: Allocate DMA encoder MPEG stream: >128 >x 32768 buffers (4096KB total) >Sep 25 09:19:45 mythtv kernel: ivtv0: Allocate DMA encoder YUV stream: >161 x >12960 buffers (2048KB total) >Sep 25 09:19:45 mythtv kernel: ivtv0: Allocate DMA encoder VBI stream: >80 x >26208 buffers (2048KB total) >Sep 25 09:19:45 mythtv kernel: ivtv0: Allocate DMA encoder PCM audio >stream: >455 x 4608 buffers (2048KB total) >Sep 25 09:19:45 mythtv kernel: ivtv0: Create encoder radio stream >Sep 25 09:19:45 mythtv kernel: tuner 0-0061: type set to 38 (Philips >PAL/SECAM multi (FM1216MEMK3)) >Sep 25 09:19:45 mythtv kernel: ivtv0: Initialized Hauppauge WinTV >PVR-150, >card #0 >Sep 25 09:19:45 mythtv kernel: ivtv: ==================== END INIT >IVTV >==================== > >When mythbackend hangs, the following lines are logged in the >/var/log/messages > >Sep 25 09:22:06 mythtv kernel: ivtv0 warning: 1000 ms time out waiting >for >firmware >Sep 25 09:22:06 mythtv kernel: ivtv0 warning: Failed api call 0x00000082 > >with result 0xfffffff0 >Sep 25 09:22:06 mythtv kernel: ivtv0 warning: ENC: Failed stopping >capture >-16 >Sep 25 09:22:09 mythtv kernel: ivtv0 warning: No Free Mailbox for cmd >0x000000db after 100 tries! >Sep 25 09:22:09 mythtv kernel: ivtv0 warning: Mailbox[0] 0x000000dc >flags >0x00000003 >Sep 25 09:22:09 mythtv kernel: ivtv0 warning: Mailbox[1] 0x000000d9 >flags >0x00000003 >Sep 25 09:22:09 mythtv kernel: ivtv0 warning: Mailbox[2] 0x000000c9 >flags >0x00000003 >Sep 25 09:22:09 mythtv kernel: ivtv0 warning: Firmware UNRESPONSIVE when > >trying cmd 0x000000db!!! >Sep 25 09:22:13 mythtv kernel: ivtv0 warning: No Free Mailbox for cmd >0x000000dc after 100 tries! >Sep 25 09:22:13 mythtv kernel: ivtv0 warning: Mailbox[0] 0x000000dc >flags >0x00000003 >Sep 25 09:22:13 mythtv kernel: ivtv0 warning: Mailbox[1] 0x000000dc >flags >0x00000003 >Sep 25 09:22:13 mythtv kernel: ivtv0 warning: Mailbox[2] 0x000000dc >flags >0x00000003 >Sep 25 09:22:13 mythtv kernel: ivtv0 warning: Firmware UNRESPONSIVE when > >trying cmd 0x000000dc!!! >Sep 25 09:22:21 mythtv kernel: ivtv0 warning: 1000 ms time out waiting >for >firmware >Sep 25 09:22:21 mythtv kernel: ivtv0 warning: Failed api call 0x000000b7 > >with result 0xfffffff0 >Sep 25 09:22:30 mythtv kernel: ivtv0 warning: 1000 ms time out waiting >for >firmware >Sep 25 09:22:30 mythtv kernel: ivtv0 warning: Failed api call 0x00000081 > >with result 0xfffffff0 >Sep 25 09:22:30 mythtv kernel: ivtv0 warning: Error starting capture! >Sep 25 09:22:30 mythtv kernel: ivtv0 warning: Failed to start capturing >for >stream 0 > >_________________________________________________________________ >De nieuwste Messenger is live! Download nu >http://imagine-msn.com/messenger/launch80/default.aspx?locale=nl-nl > > >_______________________________________________ >ivtv-users mailing list >[email protected] >http://ivtvdriver.org/mailman/listinfo/ivtv-users > >_______________________________________________ >ivtv-users mailing list >[email protected] >http://ivtvdriver.org/mailman/listinfo/ivtv-users _________________________________________________________________ Zoeken is nog nooit zo eenvoudig geweest! http://toolbar.live.com/ _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
