Hello,
I have a a PVR350 on a VIA M10000. When I try to watch TV using mplayer
/dev/video1 I get a :
dmesg:
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
I use the latest IVTV 0.8, My Xorg seems ok.(on a Ubuntu dapper).
Does anybody has an idea where to look at ?
Marc
full dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18-mm1-7 mod_unload VIAC3-2 REGPARM
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tveeprom 1-0050: Hauppauge model 48139, rev K257, serial# 8577300
tveeprom 1-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
(eeprom 0x74)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect
and autoselect
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video1 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG
ivtv0: Registered device vbi8 for decoder VBI
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
spurious 8259A interrupt: IRQ7.
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
eth0: no IPv6 routers present
vt1211: Found VT1211 chip at 0x6000, revision 2
Adding 2931820k swap on /dev/hda1. Priority:-1 extents:1 across:2931820k
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
mtrr: 0xd8000000,0x2000000 overlaps existing 0xd8000000,0x800000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
TSC appears to be running slowly. Marking it as unstable
Time: acpi_pm clocksource has been installed.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG str
xorg.log:
(II) VIA(0): [drm] DRM interface version 1.2
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0xdf1f4000
(II) VIA(0): [drm] mapped SAREA 0xdf1f4000 to 0xb5903000
(II) VIA(0): [drm] framebuffer handle = 0xd8000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [drm] register handle = 0xe0000000
(II) VIA(0): [drm] framebuffer handle = 0xd8000000
(II) VIA(0): [drm] mmio Registers = 0xe0000000
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(**) Option "dpms"
(**) VIA(0): DPMS enabled
(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x3123
(II) VIA(0): [drm] Didn't find any AGP v3 compatible device. Trying AGP
4X mode.(II) VIA(0): [drm] Trying to enable AGP fast writes.
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xd0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xd0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [dri] use agp.
(II) VIA(0): [drm] FBFreeStart= 0x00800000 FBFreeEnd= 0x01fbf000 FBSize=
0x017bf000
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): X context handle = 0x1
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [DRI] installation complete
(II) VIA(0): [dri] kernel data initialized.
(II) VIA(0): [drm] Irq handler installed, using IRQ 11.
(II) VIA(0): direct rendering enabled
(II) VIA(0): Benchmarking video copy. Less is better.
(--) VIA(0): Timed libc YUV420 copy... 13897736. Throughput: 42.6 MiB/s.
(--) VIA(0): Timed kernel YUV420 copy... 13830622. Throughput: 42.8 MiB/s.
(--) VIA(0): Timed SSE YUV420 copy... 7707122. Throughput: 76.7 MiB/s.
(--) VIA(0): Timed MMX YUV420 copy... 8140488. Throughput: 72.7 MiB/s.
(--) VIA(0): Ditch 3DNow! YUV420 copy... Not supported by CPU.
(--) VIA(0): Timed MMX2 YUV420 copy... 7419900. Throughput: 79.7 MiB/s.
(--) VIA(0): Using MMX2 YUV42X copy for video.
(II) VIA(0): [XvMC] Registering viaXvMC.
(II) VIA(0): [XvMC] Initialized XvMC extension.
(WW) VIA(0): Option "UseFBDev" is not used
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
error opening security policy file /etc/X11/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "ch"
(**) Generic Keyboard: XkbLayout: "ch"
(**) Option "XkbVariant" "fr"
(**) Generic Keyboard: XkbVariant: "fr"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always repo
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
