Second try... > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > tveeprom 3-0050: Huh, no eeprom present (err=-121)? > tveeprom 3-0050: Encountered bad packet header [bc]. Corrupt or not > a Hauppauge eeprom. > ivtv1: No tuner detected, default to NTSC
jan On Oct 10, 2006, at 4:56 PM, Jan Vilhuber wrote: > Just installed 2.6.18 on suse 10.1, as well as ivtv-0.8.0, and I > get the following: > > Linux video capture interface: v2.00 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.8.0 (tagged release) loading > ivtv: Linux version: 2.6.18-default mod_unload K7 REGPARM gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 > (level, high) -> IRQ 185 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 2-0044: loaded v4l-cx25840.fw firmware (12282 bytes) > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) > tveeprom 2-0050: Hauppauge model 23552, rev D587, serial# 8898084 > tveeprom 2-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type > 70) > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio > (idx 101, type 62) > tveeprom 2-0050: audio processor is CX25843 (idx 37) > tveeprom 2-0050: decoder processor is CX25843 (idx 30) > tveeprom 2-0050: has radio, has no IR remote > ivtv0: This is the first unit of a PVR500 > tuner 2-0060: TEA5767 detected. > tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) > tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Registered device video0 for encoder MPEG > ivtv0: Registered device video32 for encoder YUV > ivtv0: Registered device vbi0 for encoder VBI > ivtv0: Registered device video24 for encoder PCM audio > ivtv0: Registered device radio0 for encoder radio > tuner 2-0061: type set to 70 (Samsung TCPN 2121P30A) > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 > (level, high) -> IRQ 217 > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > tveeprom 3-0050: Huh, no eeprom present (err=-121)? > tveeprom 3-0050: Encountered bad packet header [bc]. Corrupt or not > a Hauppauge eeprom. > ivtv1: No tuner detected, default to NTSC > ivtv1: Encoder revision: 0x02050032 > ivtv1: Registered device video1 for encoder MPEG > ivtv1: Registered device video33 for encoder YUV > ivtv1: Registered device vbi1 for encoder VBI > ivtv1: Registered device video25 for encoder PCM audio > ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv1: i2c addr 0x44 not found for command 0x4008646f! > ivtv1: i2c hardware 0x00000020 not found for command 0x4008646d! > ivtv1: i2c hardware 0x00000001 not found for command 0x4008646d! > ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! > ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 > ivtv: ==================== END INIT IVTV ==================== > [EMAIL PROTECTED]:~/src/ivtv-0.8.0> > > Indeed the second tuner doesn't do anything, i.e. "cat /dev/video1 > > foo.mpg" gives me an empty file. > > Any clues? > jan > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
