Hi Hans,

I get this:

>ivtvctl --log-status
ivtvctl: unrecognized option `--log-status'
Unknown argument `(null)'

There isn't anything similar in the list of available options it spits out...

Peter

On Sunday 15 October 2006 23:18, Hans Verkuil wrote:
> Well, I was mistaken, the code is according to the datasheet. Can you
> mail me the output of ivtvctl --log-status when tuned to the
> problematic channel? Preferable once with the qss option and once
> without (although I suspect there won't be a difference).
>
> Thanks,
>
>       Hans
>
> On Tuesday 10 October 2006 00:21, Hans Verkuil wrote:
> > Hmm, I'm checking the datasheet and it looks like qss should be on by
> > default. I'll look into this more closely tomorrow.
> >
> >     Hans
> >
> > On Saturday 07 October 2006 21:57, Peter Bienstman wrote:
> > > Hi,
> > >
> > > Passing that option to tuner did indeed do the trick!
> > >
> > > However, this channel still has more audio noise than others. Is
> > > that something that can be helped in software?
> > >
> > > This is the debug=2 output when tuning to that channel:
> > >
> > > tuner 1-0043: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639)
> > > tuner 1-0043: tv freq set to 217.25
> > > tda9887 1-0043: configure for: PAL-BGHN
> > > tda9887 1-0043: writing: b=0x10 c=0x70 e=0x49
> > > tda9887 1-0043: write: byte B 0x10
> > > tda9887 1-0043:   B0   video mode      : sound trap
> > > tda9887 1-0043:   B1   auto mute fm    : no
> > > tda9887 1-0043:   B2   carrier mode    : Intercarrier
> > > tda9887 1-0043:   B3-4 tv sound/radio  : FM/TV
> > > tda9887 1-0043:   B5   force mute audio: no
> > > tda9887 1-0043:   B6   output port 1   : low (active)
> > > tda9887 1-0043:   B7   output port 2   : low (active)
> > > tda9887 1-0043: write: byte C 0x70
> > > tda9887 1-0043:   C0-4 top adjustment  : 0 dB
> > > tda9887 1-0043:   C5-6 de-emphasis     : 50
> > > tda9887 1-0043:   C7   audio gain      : 0
> > > tda9887 1-0043: write: byte E 0x49
> > > tda9887 1-0043:   E0-1 sound carrier   : 5.5 MHz
> > > tda9887 1-0043:   E6   l pll gating   : 36
> > > tda9887 1-0043:   E2-4 video if        : 38.9 MHz
> > > tda9887 1-0043:   E5   tuner gain      : normal
> > > tda9887 1-0043:   E7   vif agc output  : pin3+pin22 port
> > > tda9887 1-0043: --
> > > tuner 1-0060: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639)
> > > tuner 1-0061: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639)
> > > tuner 1-0061: tv freq set to 217.25
> > > tuner 1-0061: tv: param 0, range 1
> > > tuner 1-0061: Freq= 217.25 MHz, V_IF=38.93 MHz, Offset=0.00 MHz,
> > > div=4099 tuner 1-0043: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w
> > > (0x4004645c) tuner 1-0043: tv freq set to 217.25
> > > tda9887 1-0043: configure for: PAL-BGHN
> > > tda9887 1-0043: writing: b=0x10 c=0x70 e=0x49
> > > tda9887 1-0043: write: byte B 0x10
> > > tda9887 1-0043:   B0   video mode      : sound trap
> > > tda9887 1-0043:   B1   auto mute fm    : no
> > > tda9887 1-0043:   B2   carrier mode    : Intercarrier
> > > tda9887 1-0043:   B3-4 tv sound/radio  : FM/TV
> > > tda9887 1-0043:   B5   force mute audio: no
> > > tda9887 1-0043:   B6   output port 1   : low (active)
> > > tda9887 1-0043:   B7   output port 2   : low (active)
> > > tda9887 1-0043: write: byte C 0x70
> > > tda9887 1-0043:   C0-4 top adjustment  : 0 dB
> > > tda9887 1-0043:   C5-6 de-emphasis     : 50
> > > tda9887 1-0043:   C7   audio gain      : 0
> > > tda9887 1-0043: write: byte E 0x49
> > > tda9887 1-0043:   E0-1 sound carrier   : 5.5 MHz
> > > tda9887 1-0043:   E6   l pll gating   : 36
> > > tda9887 1-0043:   E2-4 video if        : 38.9 MHz
> > > tda9887 1-0043:   E5   tuner gain      : normal
> > > tda9887 1-0043:   E7   vif agc output  : pin3+pin22 port
> > > tda9887 1-0043: --
> > > tuner 1-0060: v4l2_int ioctl TDA9887_SET_CONFIG, dir=-w
> > > (0x4004645c) tuner 1-0061: v4l2_int ioctl TDA9887_SET_CONFIG,
> > > dir=-w (0x4004645c) tuner 1-0061: tv 0x10 0x03 0xce 0x06
> > > tuner 1-0043: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
> > > tuner 1-0043: Cmd VIDIOC_G_TUNER accepted for analog TV
> > > tuner 1-0060: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
> > > tuner 1-0061: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
> > > tuner 1-0061: Cmd VIDIOC_G_TUNER accepted for analog TV
> > >
> > > On Saturday 07 October 2006 18:50, Hans Verkuil wrote:
> > > > On Saturday 07 October 2006 15:11, Peter Bienstman wrote:
> > > > > Hi,
> > > > >
> > > > > I upgraded to kernel 2.6.18 and ivtv 0.8 in order to get better
> > > > > support for the new Samsung tuner, but now there is one channel
> > > > > with does not have sound.
> > > > >
> > > > > I had some trouble in the past with this particular channel
> > > > > (Canvas in Belgium), but I could get it to work using 0.7 with
> > > > > tuner type 69 and with the option qss=0 for tda9887.
> > > > >
> > > > > However, now this tda module is not even loaded anymore.
> > > > >
> > > > > Any ideas on how to fix this?
> > > >
> > > > The tda9887 module is merged with the tuner module in 2.6.18. So
> > > > the qss module option is now part of the tuner module.
> > > >
> > > >         Hans
> > > >
> > > > > Thanks!
> > > > >
> > > > > Peter
> > > > >
> > > > >
> > > > > ivtv:  ==================== START INIT IVTV
> > > > > ==================== ivtv:  version 0.8.0 (tagged release)
> > > > > loading
> > > > > ivtv:  Linux version: 2.6.18-gentoo preempt mod_unload PENTIUMM
> > > > > gcc-4.1 ivtv:  In case of problems please include the debug
> > > > > info between ivtv:  the START INIT IVTV and END INIT IVTV
> > > > > lines, along with ivtv:  any module options, when mailing the
> > > > > ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV
> > > > > PVR-150 card (cx23416 based) ACPI: PCI Interrupt
> > > > > 0000:02:08.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
> > > > > usb 1-1: configuration #1 chosen from 1 choice
> > > > > input: HID 046a:0001 as /class/input/input2
> > > > > input: USB HID v1.00 Keyboard [HID 046a:0001] on
> > > > > usb-0000:00:1d.0-1 ivtv0: loaded v4l-cx2341x-enc.fw firmware
> > > > > (262144 bytes) tveeprom 1-0050: Hauppauge model 23559, rev
> > > > > D596, serial# 8895801 tveeprom 1-0050: tuner model is Samsung
> > > > > TCPG 6121P30A (idx 96, type 73) tveeprom 1-0050: TV standards
> > > > > PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
> > > > > tveeprom 1-0050: second tuner model is Philips TEA5768HL FM
> > > > > Radio (idx 101, type 62)
> > > > > tveeprom 1-0050: audio processor is CX25843 (idx 37)
> > > > > tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> > > > > tveeprom 1-0050: has radio, has no IR remote
> > > > > ivtv0: This is the first unit of a PVR500
> > > > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > > > > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > > > > tuner 1-0060: TEA5767 detected.
> > > > > tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > > > > tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
> > > > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > > > > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > > > > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > > > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > > > > ivtv0: Encoder revision: 0x02050032
> > > > > ivtv0: Registered device video0 for encoder MPEG
> > > > > ivtv0: Registered device video32 for encoder YUV
> > > > > ivtv0: Registered device vbi0 for encoder VBI
> > > > > ivtv0: Registered device video24 for encoder PCM audio
> > > > > ivtv0: Registered device radio0 for encoder radio
> > > > > tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A)
> > > > > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> > > > > ivtv:  ======================  NEXT CARD
> > > > > ====================== ivtv1: Autodetected Hauppauge WinTV
> > > > > PVR-150 card (cx23416 based) ACPI: PCI Interrupt
> > > > > 0000:02:09.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
> > > > > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > > > > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
> > > > > tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > > > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> > > > > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> > > > > cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > > > > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
> > > > > tveeprom 2-0050: Hauppauge model 23559, rev D596, serial#
> > > > > 8895801 tveeprom 2-0050: tuner model is Samsung TCPG 6121P30A
> > > > > (idx 96, type 73) tveeprom 2-0050: TV standards PAL(B/G) PAL(I)
> > > > > SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
> > > > > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM
> > > > > Radio (idx 101, type 62)
> > > > > tveeprom 2-0050: audio processor is CX25843 (idx 37)
> > > > > tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> > > > > tveeprom 2-0050: has radio, has no IR remote
> > > > > ivtv1: This is the second unit of a PVR500
> > > > > ivtv1: Correcting tveeprom data: no radio present on second
> > > > > unit ivtv1: Encoder revision: 0x02050032
> > > > > ivtv1: Registered device video1 for encoder MPEG
> > > > > ivtv1: Registered device video33 for encoder YUV
> > > > > ivtv1: Registered device vbi1 for encoder VBI
> > > > > ivtv1: Registered device video25 for encoder PCM audio
> > > > > tuner 2-0061: type set to 73 (Samsung TCPG 6121P30A)
> > > > > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> > > > > ivtv:  ====================  END INIT IVTV
> > > > > ====================
> > > >
> > > > _______________________________________________
> > > > ivtv-users mailing list
> > > > [email protected]
> > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

-- 
------------------------------------------------
Peter Bienstman
Ghent University, Dept. of Information Technology
Sint-Pietersnieuwstraat 41, B-9000 Gent, Belgium
tel: +32 9 264 34 45, fax: +32 9 264 35 93
WWW: http://photonics.intec.UGent.be
email: [EMAIL PROTECTED]
------------------------------------------------

Attachment: pgpk4jdC4VOW2.pgp
Description: PGP signature

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to