Hi,
pretty close to tv here, just stuck about the tuner thing. i was thinking ivtv was suppose set the tuner automatically but as you tell by the ouput below, it has not. would that be all i have to do now?, and what # tuner would i use? i didnt see a guide anywhere on the site about tuner #s is this the correct syntax to set the tuner? --> modprobe tuner type= thank you!! linux-steve:/home/steve # modprobe ivtv linux-steve:/home/steve # dmesg | grep ivtv ivtv: module not supported by Novell, setting U taint flag. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.4 (tagged release) loading ivtv: Linux version: 2.6.16.21-0.25-smp SMP 586 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== linux-steve:/home/steve # _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
