On Friday 03 November 2006 22:55, Kirk Bocek wrote:
> Here's all the dmesg output from the following three commands:
>
> modprobe -f ivtv ivtv_debug=95
> ivtv-tune -c 66 (A channel I know exists)
> cat /dev/video0 > ivtvtest.mpg
>
> Here you go:
>
> ivtv0 irq: ENC START CAP 0: 000dd700 00019fc0
> ivtv0 dma: DMA encoder MPEG: 0x00019fc0 bytes at 0x000dd700
It starts the DMA transfer, but no DMA COMPLETE interrupt arrives.
Compare this to what I get:
Nov 4 01:34:57 durdane ivtv0 irq: ENC START CAP 0: 000dd700 00021fc0
Nov 4 01:34:57 durdane ivtv0 dma: DMA encoder MPEG: 0x00021fc0 bytes at
0x000dd700
Nov 4 01:34:57 durdane ivtv0 irq: ENC DMA COMPLETE 3 0
Nov 4 01:34:57 durdane ivtv0 dma: DMA encoder MPEG completed (dd700)
Is your hardware simply broken? Looking at the previous messages it
looks like you never got this card to work, right? If so, then I'd say
your card is broken unless you can prove that it works elsewhere. There
is preciously little that can go wrong here, especially with this
redesigned beta.
Regards,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
