... and ftp://ftp.hauppauge.com/Support/PVR150/Beta/060418%20amity2%202.0.43.24108.prerelease.zip with no luck
Here's my output:.. same issue exists with the 0.8 version posted on the home page
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.1 (development revision 3526) loading
ivtv: Linux version: 2.6.18 SMP preempt mod_unload PENTIUM4 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0: subsystem vendor/device: 0070/b7f3
ivtv0: cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
ivtv0: card you have to the ivtv-devel mailinglist ( www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN CARD].
PCI: Enabling device 0000:02:0d.0 (0010 -> 0012)
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 23
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tveeprom 1-0050: Hauppauge model 26032, rev C199, serial# 8238526
tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25841 (idx 35)
tveeprom 1-0050: decoder processor is CX25841 (idx 28)
tveeprom 1-0050: has no radio, has IR remote
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video1 for encoder MPEG
ivtv0: Registered device video33 for encoder YUV
ivtv0: Registered device vbi1 for encoder VBI
ivtv0: Registered device video25 for encoder PCM audio
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
Here's the important output of lspci -v
02:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Unknown device b7f3
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Any help would be greatly appreciated
Thanks,
Dave
On 11/6/06, Dave D <[EMAIL PROTECTED]
> wrote:
Hi there!
I'm having issues getting my PVR-150 to output the correct audio. Video comes in just fine, but the audio sounds like an analog TV set to an unknown frequency (nothing but static). Naturally, same sound exists when I do aplay -f dat /dev/video25 (I have the card set to /dev/video1).
could it be the firmware? I tried the firmware from both http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz and
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
